Merge pull request #40974 from nextcloud/release/26.0.8_rc2

[stable26] Update version.php to owncloud 10.13

.codecov.yml

@@ -0,0 +1,15 @@
+codecov:
+  branch: master
+  ci:
+    - drone.nextcloud.com
+    - !scrutinizer-ci.com
+
+coverage:
+  precision: 2
+  round: down
+  range: "70...100"
+  status:
+    project: off
+    patch: off
+
+comment: off

.devcontainer/Dockerfile

@@ -1,59 +1,34 @@
-FROM ubuntu:noble
+FROM ubuntu:focal
 
 ARG DEBIAN_FRONTEND=noninteractive
 
 # PHP
-RUN apt-get update -y && \
-    apt install -y apache2 vim software-properties-common sudo nano gnupg2
-
+RUN apt-get update -y
 RUN apt-get install --no-install-recommends -y \
-    php8.3 \
-    php8.3-common \
-    php8.3-gd \
-    php8.3-zip \
-    php8.3-curl \
-    php8.3-xml \
-    php8.3-xmlrpc \
-    php8.3-mbstring \
-    php8.3-sqlite \
-    php8.3-xdebug \
-    php8.3-pgsql \
-    php8.3-intl \
-    php8.3-imagick \
-    php8.3-gmp \
-    php8.3-apcu \
-    php8.3-bcmath \
-    php8.3-redis \
-    php8.3-soap \
-    php8.3-imap \
-    php8.3-opcache \
-    php8.3-cli \
-    php8.3-dev \
-    libmagickcore-6.q16-7-extra \
+    php7.4 \
+    php7.4-gd \
+    php7.4-zip \
+    php7.4-curl \
+    php7.4-xml \
+    php7.4-mbstring \
+    php7.4-sqlite \
+    php7.4-xdebug \
+    php7.4-pgsql \
+    php7.4-intl \
+    php7.4-imagick \
+    php7.4-gmp \
+    php7.4-apcu \
+    php7.4-bcmath \
+    libmagickcore-6.q16-3-extra \
     curl \
+    vim \
     lsof \
     make \
-	unzip
+    nodejs \
+    npm
 
-# Composer
-RUN curl -sS https://getcomposer.org/installer -o /tmp/composer-setup.php && \
-    curl -sS https://composer.github.io/installer.sig -o /tmp/composer-setup.sig && \
-    php -r "if (hash_file('sha384', '/tmp/composer-setup.php') !== trim(file_get_contents('/tmp/composer-setup.sig'))) { echo 'Composer installation failed, invalid hash'; exit(1); }" && \
-    php /tmp/composer-setup.php --install-dir=/usr/local/bin --filename=composer && \
-    rm /tmp/composer-setup.php /tmp/composer-setup.sig
-
-RUN echo "xdebug.remote_enable = 1" >> /etc/php/8.3/cli/conf.d/20-xdebug.ini && \
-    echo "xdebug.remote_autostart = 1" >> /etc/php/8.3/cli/conf.d/20-xdebug.ini && \
-	echo "apc.enable_cli=1" >> /etc/php/8.3/cli/conf.d/20-apcu.ini
-
-# Autostart XDebug for apache
-RUN { \
-	echo "xdebug.mode=debug"; \
-	echo "xdebug.start_with_request=yes"; \
-} >> /etc/php/8.3/apache2/conf.d/20-xdebug.ini
-
-# Increase PHP memory limit to 512mb
-RUN sed -i 's/memory_limit = .*/memory_limit = 512M/' /etc/php/8.3/apache2/php.ini
+RUN echo "xdebug.remote_enable = 1" >> /etc/php/7.4/cli/conf.d/20-xdebug.ini
+RUN echo "xdebug.remote_autostart = 1" >> /etc/php/7.4/cli/conf.d/20-xdebug.ini
 
 # Docker
 RUN apt-get -y install \
@@ -61,29 +36,12 @@ RUN apt-get -y install \
     ca-certificates \
     curl \
     gnupg-agent \
-    software-properties-common && \
-    curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add - && \
-    add-apt-repository \
+    software-properties-common
+RUN curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add -
+RUN add-apt-repository \
    "deb [arch=amd64] https://download.docker.com/linux/ubuntu \
    $(lsb_release -cs) \
-   stable" && \
-    apt-get update -y && \
-    apt-get install -y docker-ce docker-ce-cli containerd.io && \
-    ln -s /var/run/docker-host.sock /var/run/docker.sock
-
-# Dedicated DevContainer user runs Apache
-ENV APACHE_RUN_USER=devcontainer
-ENV APACHE_RUN_GROUP=devcontainer
-RUN useradd -ms /bin/bash ${APACHE_RUN_USER} && \
-	adduser ${APACHE_RUN_USER} sudo && \
-	echo '%sudo ALL=(ALL) NOPASSWD:ALL' >> /etc/sudoers && \
-	sed -ri "s/^export APACHE_RUN_USER=.*$/export APACHE_RUN_USER=${APACHE_RUN_USER}/" "/etc/apache2/envvars" && \
-    sed -ri "s/^export APACHE_RUN_GROUP=.*$/export APACHE_RUN_GROUP=${APACHE_RUN_GROUP}/" "/etc/apache2/envvars"
-
-USER devcontainer
-
-# NVM
-RUN curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.0/install.sh | bash
-RUN bash --login -i -c 'source /home/devcontainer/.bashrc && nvm install 16'
-
-WORKDIR /var/www/html
+   stable"
+RUN apt-get update -y
+RUN apt-get install -y docker-ce docker-ce-cli containerd.io
+RUN ln -s /var/run/docker-host.sock /var/run/docker.sock  

.devcontainer/Dockerfile.license

@@ -1,2 +0,0 @@
-SPDX-FileCopyrightText: 2021 Nextcloud GmbH and Nextcloud contributors
-SPDX-License-Identifier: AGPL-3.0-or-later

.devcontainer/README.md

@@ -1,76 +0,0 @@
-<!--
-  - SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-  - SPDX-License-Identifier: AGPL-3.0-or-later
--->
-# Nextcloud DevContainer
-
-## Usage
-
-Make sure you have the [VSCode DevContainer](https://code.visualstudio.com/docs/devcontainers/containers) extensions installed. If you open the project, VSCode will ask you if you want to open it inside of the DevContainer. If that's not the case, use <kbd>F1</kbd>&rarr;*Dev Containers: Open Folder in Container*.
-
-Alternatively open the project directly in [GitHub Codespaces](https://github.com/codespaces/new?hide_repo_select=true&ref=master&repo=60243197&skip_quickstart=true).
-
-That's already it. Everything else will be configured automatically by the Containers startup routine.
-
-## Credentials
-
-On first start the Container installs and configures Nextcloud with the following credentials:
-
-**Nextcloud Admin Login**
-
-Username: `admin` <br>
-Password: `admin`
-
-**Postgres credentials**
-
-Username: `postgres` <br>
-Password: `postgres` <br>
-Database: `postgres`
-
-## Services
-
-The following services will be started:
-
-| Service | Local port | Description |
-|---------|------------|-------------|
-| Nextcloud (served via Apache) | `80` | The main application |
-| Mailhog | `8025` | SMTP email delivery for testing |
-| Adminer | `8080` | Database viewer. Use credentials from above and connect to `localhost` to get access to the NC database | 
-
-## Permissions
-
-The container runs with the user `devcontainer` who is also running the Apache2 process. All mounted source files have
-proper permissions so that this user can access everything which is inside the current workspace. If you need to
-get root permissions for whatever reason, use `sudo su` or `sudo <command>` (for example `sudo service apache2 restart`).
-Everything else (like building the application, adjusting files, ...) should be done as `devcontainer` user.
-
-## NodeJs and NVM
-
-The container comes with [`nvm`](https://github.com/nvm-sh/nvm) and Node 16 installed. This should be sufficient to
-build Nextcloud Core sources via `make`. If you need a different Node Version (for example for
-app development), you can easily switch between different versions by running:
-
-```bash
-# Install and use Node 14
-nvm install 14
-nvm use 14
-
-# Check version 
-node -v
-
-# Switch back to Node 16
-nvm use 16
-
-# Check version
-node -v
-```
-
-Note that `nvm` is only installed for the user `devcontainer` and won't work out of the box for
-any other user.
-
-## Debugging
-
-The Apache webserver is already configured to automatically try to connect to a debugger process
-listening on port `9003`. To start the VSCode debugger process, use the delivered debug profile `Listen for XDebug`.
-After you started the VSCode debugger, just navigate to the appropriate Nextcloud URL to get your
-debug hits. 

.devcontainer/codespace.config.php

@@ -1,9 +1,5 @@
 <?php
 
-/**
- * SPDX-FileCopyrightText: 2021 Nextcloud GmbH and Nextcloud contributors
- * SPDX-License-Identifier: AGPL-3.0-or-later
- */
 $codespaceName = getenv('CODESPACE_NAME');
 $codespaceDomain = getenv('GITHUB_CODESPACES_PORT_FORWARDING_DOMAIN');
 
@@ -18,9 +14,6 @@ $CONFIG = [
 ];
 
 if(is_string($codespaceName) && !empty($codespaceName) && is_string($codespaceDomain) && !empty($codespaceDomain)) {
-    $host = $codespaceName . '-80.' . $codespaceDomain;
-    $CONFIG['overwritehost'] = $host;
-    $CONFIG['overwrite.cli.url'] = 'https://' . $host;
+    $CONFIG['overwritehost'] = $codespaceName . '-80.' . $codespaceDomain;
     $CONFIG['overwriteprotocol'] = 'https';
-	$CONFIG['trusted_domains'] = [ $host ];
 }

.devcontainer/devcontainer.json

@@ -3,26 +3,20 @@
 	"dockerComposeFile": "docker-compose.yml",
 	"service": "nextclouddev",
 	"postCreateCommand": ".devcontainer/setup.sh",
-	"postStartCommand": ".devcontainer/postStart.sh",
 	"forwardPorts": [
 		80,
 		8080,
 		8025
 	],
-	"customizations": {
-		"vscode": {
-			"extensions": [
-				"felixfbecker.php-debug",
-				"felixfbecker.php-intellisense",
-				"ms-azuretools.vscode-docker",
-				"xdebug.php-debug",
-				"donjayamanne.githistory"
-			],
-			"settings": {
-				"php.suggest.basic": false
-			}
-		}
-	},
-	"workspaceFolder": "/var/www/html",
-	"remoteUser": "devcontainer"
+	"runArgs": [
+		"--privileged"
+	],
+	"extensions": [
+		"felixfbecker.php-debug",
+		"felixfbecker.php-intellisense",
+		"ms-azuretools.vscode-docker"
+	],
+	"settings": {
+		"php.suggest.basic": false,
+	}
 }

.devcontainer/devcontainer.json.license

@@ -1,2 +0,0 @@
-SPDX-FileCopyrightText: 2021 Nextcloud GmbH and Nextcloud contributors
-SPDX-License-Identifier: AGPL-3.0-or-later

.devcontainer/docker-compose.yml

@@ -1,5 +1,3 @@
-# SPDX-FileCopyrightText: 2021 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
 version: '3'
 services:
   nextclouddev:
@@ -7,8 +5,7 @@ services:
     volumes:
       - .:/workspace:cached
       - /var/run/docker.sock:/var/run/docker-host.sock
-      - ..:/var/www/html
-    command: /var/www/html/.devcontainer/entrypoint.sh
+    command: /bin/sh -c "while sleep 1000; do :; done"
     ports:
       - 80:80
       - 8080:8080
@@ -19,9 +16,6 @@ services:
     restart: always
     environment:
       POSTGRES_PASSWORD: postgres
-      PGDATA: /data/postgres
-    volumes:
-      - db:/data/postgres
     network_mode: service:nextclouddev
 
   adminer:
@@ -33,6 +27,3 @@ services:
     image: mailhog/mailhog
     restart: always
     network_mode: service:nextclouddev
-
-volumes:
-  db:

.devcontainer/entrypoint.sh

@@ -1,8 +0,0 @@
-#!/bin/bash
-#
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
-#
-sudo service apache2 start
-
-while sleep 1000; do :; done

.devcontainer/launch.json

@@ -1,14 +0,0 @@
-{
-    // Use IntelliSense to learn about possible attributes.
-    // Hover to view descriptions of existing attributes.
-    // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
-    "version": "0.2.0",
-    "configurations": [
-        {
-            "name": "Listen for Xdebug",
-            "type": "php",
-            "request": "launch",
-            "port": 9003
-        }
-    ]
-}

.devcontainer/launch.json.license

@@ -1,2 +0,0 @@
-SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-SPDX-License-Identifier: AGPL-3.0-or-later

.devcontainer/postStart.sh

@@ -1,8 +0,0 @@
-#!/bin/bash
-#
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
-#
-# Set git safe.directory
-git config --global --add safe.directory /var/www/html
-git config --global --add safe.directory /var/www/html/3rdparty

.devcontainer/setup.sh

@@ -1,33 +1,8 @@
 #!/bin/bash
-#
-# SPDX-FileCopyrightText: 2021 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
-#
 DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )/../" >/dev/null 2>&1 && pwd )"
 
 cd $DIR/
-
 git submodule update --init
 
 # Codespace config
 cp .devcontainer/codespace.config.php config/codespace.config.php
-
-# VSCode debugger profile
-mkdir -p .vscode && cp .devcontainer/launch.json .vscode/launch.json
-
-# Onetime installation setup
-if [[ ! $(sudo -u ${APACHE_RUN_USER} php occ status) =~ installed:[[:space:]]*true ]]; then
-    echo "Running NC installation"
-    sudo -u ${APACHE_RUN_USER} php occ maintenance:install \
-        --verbose \
-        --database=pgsql \
-        --database-name=postgres \
-        --database-host=127.0.0.1 \
-        --database-port=5432 \
-        --database-user=postgres \
-        --database-pass=postgres \
-        --admin-user admin \
-        --admin-pass admin
-fi
-
-sudo service apache2 restart

.editorconfig

@@ -1,8 +1,5 @@
 # https://editorconfig.org
 
-# SPDX-FileCopyrightText: 2019 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
-
 root = true
 
 [*]
@@ -26,15 +23,3 @@ trim_trailing_whitespace = false
 
 [*.svg]
 insert_final_newline = false
-
-[package*.json]
-indent_size = 2
-indent_style = space
-
-[build/psalm-baseline.xml]
-indent_size = 2
-indent_style = space
-
-[config/*config.php]
-indent_size = 2
-indent_style = space

.eslintignore

@@ -1,5 +1,3 @@
-# SPDX-FileCopyrightText: 2021 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
 # Ignoring folders for eslint
 node_modules/
 3rdparty/

.eslintrc.js

@@ -1,24 +1,20 @@
-/**
- * SPDX-FileCopyrightText: 2019 Nextcloud GmbH and Nextcloud contributors
- * SPDX-License-Identifier: AGPL-3.0-or-later
- */
 module.exports = {
 	globals: {
 		__webpack_nonce__: true,
 		_: true,
 		$: true,
-		dayNames: true,
-		escapeHTML: true,
-		firstDay: true,
 		moment: true,
+		escapeHTML: true,
 		oc_userconfig: true,
-		sinon: true,
+		dayNames: true,
+		firstDay: true,
+		'cypress/globals': true,
 	},
 	plugins: [
 		'cypress',
 	],
 	extends: [
-		'@nextcloud/eslint-config/typescript',
+		'@nextcloud',
 		'plugin:cypress/recommended',
 	],
 	rules: {
@@ -36,13 +32,4 @@ module.exports = {
 			mode: 'typescript',
 		},
 	},
-	overrides: [
-		// Allow any in tests
-		{
-			files: ['**/*.spec.ts'],
-			rules: {
-				'@typescript-eslint/no-explicit-any': 'warn',
-			},
-		}
-	],
 }

.git-blame-ignore-revs

@@ -1,17 +0,0 @@
-# .git-blame-ignore-revs
-
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
-
-# Format control structures
-caff1023ea72bb2ea94130e18a2a6e2ccf819e5f
-# Update to coding-standard 1.1.1
-aa5f037af71c915424c6dcfd5ad2dc82797dc0d6
-# Update to coding-standard 1.2.3
-af6de04e9e141466dc229e444ff3f146f4a34765
-0bd284cb81b6866338aaaa67aa1d81ef9bfbb2ab
-8af7ecb2576071f170ecbb0aa2311b26581e40e2
-# Update to coding-standard 1.3.1
-9836e9b16484582d309c8437ab46d82e34956941
-# Automated refactorings
-49dd79eabb2b8902559a7a4e8f8fcad54f46b604

.gitattributes

@@ -1,6 +1,3 @@
-# SPDX-FileCopyrightText: 2018 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
 /dist/* binary
 /package-lock.json merge=binary
 /core/css/*.css* binary
-/.devcontainer/*.sh text eol=lf

.github/CODEOWNERS

@@ -1,80 +1,16 @@
-# App maintainers
-/apps/admin_audit/appinfo/info.xml            @luka-nextcloud @blizzz
-/apps/cloud_federation_api/appinfo/info.xml   @mejo-
-/apps/comments/appinfo/info.xml               @edward-ly @Pytal
-/apps/contactsinteraction/appinfo/info.xml    @kesselb @SebastianKrupinski
-/apps/contactsinteraction/lib                 @kesselb @SebastianKrupinski
-/apps/contactsinteraction/tests               @kesselb @SebastianKrupinski
-/apps/dashboard/appinfo/info.xml              @julien-nc @juliusknorr
-/apps/dav/lib/CalDAV                          @st3iny @SebastianKrupinski @tcitworld
-/apps/dav/lib/CardDAV                         @hamza221 @SebastianKrupinski
-/apps/dav/tests/unit/CalDAV                   @st3iny @SebastianKrupinski @tcitworld
-/apps/dav/tests/unit/CardDAV                  @hamza221 @SebastianKrupinski
-/apps/encryption/appinfo/info.xml             @come-nc @icewind1991
-/apps/federatedfilesharing/appinfo/info.xml   @icewind1991 @danxuliu
-/apps/federation/appinfo/info.xml             @nfebe
-/apps/files/appinfo/info.xml                  @skjnldsv @Pytal @ArtificialOwl @come-nc @artonge @icewind1991 @szaimen @susnux @nfebe
-/apps/files_external/appinfo/info.xml         @icewind1991 @artonge
-/apps/files_reminders/appinfo/info.xml        @Pytal
-/apps/files_sharing/appinfo/info.xml          @skjnldsv @come-nc
-/apps/files_trashbin/appinfo/info.xml         @Pytal @icewind1991
-/apps/files_versions/appinfo/info.xml         @artonge @icewind1991
-/apps/oauth2/appinfo/info.xml                 @julien-nc @ChristophWurst
-/apps/provisioning_api/appinfo/info.xml       @provokateurin @nickvergessen
-/apps/settings/appinfo/info.xml               @Pytal @JuliaKirschenheuter
-/apps/sharebymail/appinfo/info.xml            @Altahrim
-/apps/systemtags/appinfo/info.xml             @Antreesy @marcelklehr
-/apps/theming/appinfo/info.xml                @skjnldsv @juliusknorr
-/apps/twofactor_backupcodes/appinfo/info.xml  @st3iny @miaulalala @ChristophWurst
-/apps/updatenotification/appinfo/info.xml     @Pytal @JuliaKirschenheuter
-/apps/user_ldap/appinfo/info.xml              @come-nc @blizzz
-/apps/user_status/appinfo/info.xml            @Antreesy @nickvergessen
-/apps/weather_status/appinfo/info.xml         @julien-nc @juliusknorr
-/apps/webhook_listeners/appinfo/info.xml      @come-nc @julien-nc
-/apps/workflowengine/appinfo/info.xml         @blizzz @juliusknorr
-
-# Frontend expertise
-/apps/files/src*                  @skjnldsv
-/apps/files_external/src*         @skjnldsv
-/apps/files_reminders/src*        @skjnldsv
-/apps/files_sharing/src/actions*  @skjnldsv
-/apps/files_trashbin/src*         @skjnldsv
-
-# Security team
-/build/psalm-baseline-security.xml  @nickvergessen
-/resources/codesigning              @mgallien @miaulalala @nickvergessen
-/resources/config/ca-bundle.crt     @miaulalala @nickvergessen
+*/Activity/*                        @nickvergessen
+*/Notifications/*                   @nickvergessen
+/apps/dav/lib/CalDAV                @ChristophWurst @miaulalala @tcitworld
+/apps/dav/lib/CardDAV               @ChristophWurst @miaulalala @tcitworld
 
 # Two-Factor Authentication
 # https://github.com/nextcloud/wg-two-factor-authentication#members
-**/TwoFactorAuth                    @ChristophWurst @miaulalala @nickvergessen @st3iny
-/apps/twofactor_backupcodes         @ChristophWurst @miaulalala @nickvergessen @st3iny
-/core/templates/twofactor*          @ChristophWurst @miaulalala @nickvergessen @st3iny
+/apps/twofactor_backupcodes        @ChristophWurst @miaulalala @nickvergessen
+*/TwoFactorAuth/*                  @ChristophWurst @miaulalala @nickvergessen
+/core/templates/twofactor*         @ChristophWurst @miaulalala @nickvergessen
 
-# Limit login to IP
-# Watch login routes for https://github.com/nextcloud/limit_login_to_ip
-/core/routes.php	@Altahrim
+/lib/private/Profiler              @CarlSchwan
+/lib/public/Profiler               @CarlSchwan
 
-# OpenAPI
-openapi*.json           @provokateurin
-ResponseDefinitions.php @provokateurin
-
-# Talk team
-/lib/private/Comments               @nickvergessen
-/lib/private/Federation             @nickvergessen
-/lib/private/Talk                   @nickvergessen
-/lib/public/Comments                @nickvergessen
-/lib/public/Federation              @nickvergessen
-/lib/public/OCM                     @nickvergessen
-/lib/public/Talk                    @nickvergessen
-/lib/public/UserStatus              @nickvergessen
-
-# Groupware
-/build/integration/dav_features/caldav.feature    @st3iny @SebastianKrupinski
-/build/integration/dav_features/carddav.feature   @st3iny @SebastianKrupinski
-
-# Personal interest
-*/Activity/*                        @nickvergessen
-*/Notifications/*                   @nickvergessen
-/lib/private/Profiler               @CarlSchwan
-/lib/public/Profiler                @CarlSchwan
+# Security team
+resources/config/ca-bundle.crt    @ChristophWurst @julien-nc @miaulalala @nickvergessen

.github/CONTRIBUTING.md

@@ -1,10 +1,6 @@
-<!--
- - SPDX-FileCopyrightText: 2016 Nextcloud GmbH and Nextcloud contributors
- - SPDX-License-Identifier: AGPL-3.0-or-later
--->
 ## Submitting issues
 
-If you have questions about how to install or use Nextcloud, please direct these to our [forum][forum]. We are also available on [IRC][irc] (unofficial).
+If you have questions about how to install or use Nextcloud, please direct these to our [forum][forum]. We are also available on [IRC][irc].
 
 ### Short version
 
@@ -25,7 +21,7 @@ Help us to maximize the effort we can spend fixing issues and adding new feature
 
 [templates]: ./ISSUE_TEMPLATE
 [forum]: https://help.nextcloud.com/
-[irc]: https://web.libera.chat/#nextcloud
+[irc]: https://webchat.freenode.net/?channels=nextcloud
 
 ## Contributing to Source Code
 
@@ -33,13 +29,6 @@ Thanks for wanting to contribute source code to Nextcloud. That's great!
 
 Please read the [Developer Manuals][devmanual] to learn how to create your first application or how to test the Nextcloud code with PHPUnit.
 
-### Conventional Commits
-
-Please use [Conventional Commits](https://www.conventionalcommits.org) for your commit messages. This helps maintain clarity and consistency across the project, making it easier to understand changes and automate versioning.
-```
-feat(files_sharing): allow sharing with contacts
-``` 
-
 ### Tests
 
 In order to constantly increase the quality of our software we can no longer accept pull request which submit un-tested code.
@@ -48,16 +37,16 @@ In some areas unit testing is hard (aka almost impossible) as of today - in thes
 
 ### Sign your work
 
-We use the Developer Certificate of Origin (DCO) as an additional safeguard
+We use the Developer Certificate of Origin (DCO) as a additional safeguard
 for the Nextcloud project. This is a well established and widely used
 mechanism to assure contributors have confirmed their right to license
 their contribution under the project's license.
 Please read [contribute/developer-certificate-of-origin][dcofile].
 If you can certify it, then just add a line to every git commit message:
 
-```
-Signed-off-by: Random J Developer <random@developer.example.org>
-```
+````
+  Signed-off-by: Random J Developer <random@developer.example.org>
+````
 
 Use your real name (sorry, no pseudonyms or anonymous contributions).
 If you set your `user.name` and `user.email` git configs, you can sign your

.github/FUNDING.yml

@@ -1,3 +1 @@
-# SPDX-FileCopyrightText: 2019 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
 custom: https://nextcloud.com/include/

.github/ISSUE_TEMPLATE/BUG_REPORT.yml

@@ -1,6 +1,4 @@
-# SPDX-FileCopyrightText: 2022 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
-name: "🐛 Bug report: Nextcloud Server"
+name: "Bug report: Nextcloud Server"
 description: "Submit a report and help us improve Nextcloud Server"
 title: "[Bug]: "
 labels: ["bug", "0. Needs triage"]
@@ -11,14 +9,6 @@ body:
         ### 👍 Thank you for contributing to our project!
         Please note this is a **free and open-source** project. Most people take on their own time to help you, so please, be patient.
         You can obtain [Enterprise support](https://nextcloud.com/support/) if you run Nextcloud Server in a mission critical environment.
-  - type: markdown
-    attributes:
-      value: |
-        ### 🚨 SECURITY INFO
-        If you are reporting a security concern, please report it via [our HackerOne page](https://hackerone.com/nextcloud) instead and review our [security policy](https://nextcloud.com/security/).
-        This allows us to coordinate the fix and release without potentially exposing all Nextcloud servers and users in the meantime.
-        It also may qualify your report for a bug bounty reward.
-        Thank you for helping make Nextcloud more secure!
   - type: checkboxes
     id: before-posting
     attributes:
@@ -27,10 +17,12 @@ body:
       options:
         - label: This is a **bug**, not a question or a configuration/webserver/proxy issue.
           required: true
-        - label: This issue is **not** already reported on [Github](https://github.com/nextcloud/server/issues?q=is%3Aopen+is%3Aissue+label%3Abug) OR [Nextcloud Community Forum](https://help.nextcloud.com/) _(I've searched it)_.
+        - label: This issue is **not** already reported on Github _(I've searched it)_.
           required: true
         - label: Nextcloud Server **is** up to date. See [Maintenance and Release Schedule](https://github.com/nextcloud/server/wiki/Maintenance-and-Release-Schedule) for supported versions.
           required: true
+        - label: Nextcloud Server **is** running on 64bit capable CPU, PHP and OS.
+          required: true
         - label: I agree to follow Nextcloud's [Code of Conduct](https://nextcloud.com/contribute/code-of-conduct/).
           required: true
   - type: textarea
@@ -48,7 +40,7 @@ body:
       label: Steps to reproduce
       description: |
         Describe the steps to reproduce the bug.
-        The better your description is _(go 'here', click 'there'...)_ the fastest you'll get an _(accurate)_ answer.
+        The better your description is _(go 'here', click 'there'...)_ the fastest you'll get an _(accurate)_ answer. 
       value: |
         1.
         2.
@@ -63,19 +55,21 @@ body:
     validations:
       required: true
   - type: dropdown
-    id: nextcloud-version
+    id: install-method
     attributes:
-      label: Nextcloud Server version
+      label: Installation method
       description: |
-        Select Nextcloud Server version.
-        _Versions not listed here are not maintained and not supported anymore_
+        Select installation method you've used.
+        _Describe the method in the "Additional info" section if you chose "Other"._
       options:
-        - "29"
-        - "30"
-        - "31"
-        - "master"
-    validations:
-      required: true
+        - "Official All-in-One appliance"
+        - "Community Web installer on a VPS or web space"
+        - "Community Manual installation with Archive"
+        - "Community Docker image"
+        - "Community NextcloudPi appliance"
+        - "Community SNAP package"
+        - "Community VM appliance"
+        - "Other Community project"
   - type: dropdown
     id: system
     attributes:
@@ -95,9 +89,9 @@ body:
         Select PHP engine version serving Nextcloud Server.
         _Describe in the "Additional info" section if you chose "Other"._
       options:
-        - "PHP 8.4"
-        - "PHP 8.3"
-        - "PHP 8.2"
+        - "PHP 7.3"
+        - "PHP 7.4"
+        - "PHP 8.0"
         - "PHP 8.1"
         - "Other"
   - type: dropdown
@@ -110,6 +104,7 @@ body:
       options:
         - "Apache (supported)"
         - "Nginx"
+        - "Lighttpd"
         - "Other"
   - type: dropdown
     id: database
@@ -132,8 +127,8 @@ body:
       description: |
         Select if bug is present after an update or on a fresh install.
       options:
-        - "Updated from a MINOR version (ex. 32.0.1 to 32.0.2)"
-        - "Upgraded to a MAJOR version (ex. 31 to 32)"
+        - "Updated from a minor version (ex. 22.2.3 to 22.2.4)"
+        - "Updated to a major version (ex. 22.2.3 to 23.0.1)"
         - "Fresh Nextcloud Server install"
   - type: dropdown
     id: encryption
@@ -168,7 +163,7 @@ body:
         ./occ config:list system
         ```
         > NOTE: This will be automatically formatted into code for better readability.
-      render: json
+      render: shell
   - type: textarea
     id: apps
     attributes:
@@ -183,6 +178,8 @@ body:
         ```
         > NOTE: This will be automatically formatted into code for better readability.
       render: shell
+    validations:
+      required: true
   - type: textarea
     id: nextcloud-signingstatus
     attributes:
@@ -191,7 +188,7 @@ body:
         Provide Nextcloud Signing status.
         First, login as Admin user into your Nextcloud, then access this URL:
         ```shell
-        https://yournextcloud.tld/index.php/settings/integrity/failed
+        https://yournextcloud.tld/index.php/settings/integrity/failed 
         ```
         > NOTE: This will be automatically formatted into code for better readability.
       render: shell
@@ -200,10 +197,10 @@ body:
     attributes:
       label: Nextcloud Logs
       description: |
-        Provide relevant Nextcloud log entries (e.g. from the time period you reproduced the problem).
-        Copy full individual entries from `data/nextcloud.log` or use `Copy raw entry` from `/settings/admin/logging` section:
+        Provide Nextcloud logs lines.
+        Copy all contents from `data/nextcloud.log` or a RAW from `/settings/admin/logging` section:
         > NOTE: This will be automatically formatted into code for better readability.
-      render: json
+      render: shell
   - type: textarea
     id: additional-info
     attributes:

.github/ISSUE_TEMPLATE/Feature_request.md.license

@@ -1,2 +0,0 @@
-SPDX-FileCopyrightText: 2018 Nextcloud GmbH and Nextcloud contributors
-SPDX-License-Identifier: AGPL-3.0-or-later

.github/ISSUE_TEMPLATE/config.yml

@@ -1,9 +1,5 @@
-# SPDX-FileCopyrightText: 2020 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
+blank_issues_enabled: false
 contact_links:
-    - name: 🚨 Report a security or privacy issue
-      url: https://hackerone.com/nextcloud
-      about: Report security and privacy related issues privately to the Nextcloud team, so we can coordinate the fix and release without potentially exposing all Nextcloud servers and users in the meantime.
     - name: ❓ Community Support and Help
       url: https://help.nextcloud.com/
       about: Configuration, webserver/proxy or performance issues and other questions

.github/config.yml

@@ -1,5 +1,3 @@
-# SPDX-FileCopyrightText: 2018 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
 firstPRMergeComment: >
     Thanks for your first pull request and welcome to the community!
     Feel free to keep them coming! If you are looking for issues to tackle then have a look at this selection: https://github.com/nextcloud/server/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+issue%22

.github/dependabot.yml

@@ -1,5 +1,3 @@
-# SPDX-FileCopyrightText: 2020 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
 version: 2
 updates:
 # Linting and coding style
@@ -16,63 +14,6 @@ updates:
   reviewers:
     - "nextcloud/server-dependabot"
 
-# cs-fixer
-- package-ecosystem: composer
-  directory: "/vendor-bin/cs-fixer"
-  schedule:
-    interval: weekly
-    day: saturday
-    time: "04:10"
-    timezone: Europe/Copenhagen
-  labels:
-    - "3. to review"
-    - "feature: dependencies"
-  reviewers:
-    - "nextcloud/server-dependabot"
-
-# openapi-extractor
-- package-ecosystem: composer
-  directory: "/vendor-bin/openapi-extractor"
-  schedule:
-    interval: weekly
-    day: saturday
-    time: "04:20"
-    timezone: Europe/Brussels
-  labels:
-    - "3. to review"
-    - "feature: dependencies"
-  reviewers:
-    - "nextcloud/server-dependabot"
-    - "provokateurin"
-
-# psalm
-- package-ecosystem: composer
-  directory: "/vendor-bin/psalm"
-  schedule:
-    interval: weekly
-    day: saturday
-    time: "04:30"
-    timezone: Europe/Madrid
-  labels:
-    - "3. to review"
-    - "feature: dependencies"
-  reviewers:
-    - "nextcloud/server-dependabot"
-
-# phpunit
-- package-ecosystem: composer
-  directory: "/vendor-bin/phpunit"
-  schedule:
-    interval: weekly
-    day: saturday
-    time: "04:40"
-    timezone: Europe/Madrid
-  labels:
-    - "3. to review"
-    - "feature: dependencies"
-  reviewers:
-    - "nextcloud/server-dependabot"
-
 # Main master npm
 - package-ecosystem: npm
   directory: "/"
@@ -114,6 +55,8 @@ updates:
     - "3. to review"
     - "feature: dependencies"
 
+
+# Main stableXX npm
 - package-ecosystem: npm
   directory: "/"
   schedule:
@@ -121,17 +64,16 @@ updates:
     day: saturday
     time: "03:00"
     timezone: Europe/Paris
-  target-branch: stable29
+  target-branch: stable24
   labels:
     - "3. to review"
     - "feature: dependencies"
   reviewers:
     - "nextcloud/server-dependabot"
   ignore:
+    # ignore all GitHub linguist patch updates
     - dependency-name: "*"
-      update-types: ["version-update:semver-major", "version-update:semver-minor"]
-  # Disable automatic rebasing because without a build CI will likely fail anyway
-  rebase-strategy: "disabled"
+      update-types: ["version-update:semver-major", "version-update:semver-minor", "version-update:semver-patch"]
 
 - package-ecosystem: npm
   directory: "/"
@@ -140,37 +82,18 @@ updates:
     day: saturday
     time: "03:00"
     timezone: Europe/Paris
-  target-branch: stable30
+  target-branch: stable25
   labels:
     - "3. to review"
     - "feature: dependencies"
   reviewers:
     - "nextcloud/server-dependabot"
   ignore:
+    # ignore all GitHub linguist patch updates
     - dependency-name: "*"
-      update-types: ["version-update:semver-major", "version-update:semver-minor"]
-  # Disable automatic rebasing because without a build CI will likely fail anyway
-  rebase-strategy: "disabled"
-
-- package-ecosystem: npm
-  directory: "/"
-  schedule:
-    interval: weekly
-    day: saturday
-    time: "03:00"
-    timezone: Europe/Paris
-  target-branch: stable31
-  labels:
-    - "3. to review"
-    - "feature: dependencies"
-  reviewers:
-    - "nextcloud/server-dependabot"
-  ignore:
-    - dependency-name: "*"
-      update-types: ["version-update:semver-major", "version-update:semver-minor"]
-  # Disable automatic rebasing because without a build CI will likely fail anyway
-  rebase-strategy: "disabled"
+      update-types: ["version-update:semver-major", "version-update:semver-minor", "version-update:semver-patch"]
 
+# Testing StableXX composer
 - package-ecosystem: composer
   directory: "/build/integration"
   schedule:
@@ -178,7 +101,7 @@ updates:
     day: saturday
     time: "03:00"
     timezone: Europe/Paris
-  target-branch: stable29
+  target-branch: stable24
   labels:
     - "3. to review"
     - "feature: dependencies"
@@ -196,7 +119,7 @@ updates:
     day: saturday
     time: "03:00"
     timezone: Europe/Paris
-  target-branch: stable30
+  target-branch: stable25
   labels:
     - "3. to review"
     - "feature: dependencies"
@@ -206,38 +129,3 @@ updates:
     # ignore all GitHub linguist patch updates
     - dependency-name: "*"
       update-types: ["version-update:semver-major", "version-update:semver-minor", "version-update:semver-patch"]
-
-- package-ecosystem: composer
-  directory: "/build/integration"
-  schedule:
-    interval: weekly
-    day: saturday
-    time: "03:00"
-    timezone: Europe/Paris
-  target-branch: stable31
-  labels:
-    - "3. to review"
-    - "feature: dependencies"
-  reviewers:
-    - "nextcloud/server-dependabot"
-  ignore:
-    # ignore all GitHub linguist patch updates
-    - dependency-name: "*"
-      update-types: ["version-update:semver-major", "version-update:semver-minor", "version-update:semver-patch"]
-
-# GitHub Actions
-- package-ecosystem: "github-actions"
-  directory: "/"
-  schedule:
-    interval: monthly
-    timezone: Europe/Paris
-  groups:
-    github-actions:
-      patterns:
-        - "*"
-  labels:
-    - "3. to review"
-    - "feature: dependencies"
-  reviewers:
-    - "nextcloud/server-dependabot"
-

.github/pull_request_template.md

@@ -1,8 +1,3 @@
-<!--
-  - 🚨 SECURITY INFO
-  -
-  - Before sending a pull request that fixes a security issue please report it via our HackerOne page (https://hackerone.com/nextcloud) following our security policy (https://nextcloud.com/security/). This allows us to coordinate the fix and release without potentially exposing all Nextcloud servers and users in the meantime.
--->
 
 * Resolves: # <!-- related github issue -->
 

.github/pull_request_template.md.license

@@ -1,2 +0,0 @@
-SPDX-FileCopyrightText: 2022 Nextcloud GmbH and Nextcloud contributors
-SPDX-License-Identifier: AGPL-3.0-or-later

.github/workflows/autocheckers.yml

@@ -1,98 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: Code checkers
-
-on:
-  pull_request:
-
-permissions:
-  contents: read
-
-concurrency:
-  group: autocheckers-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src }}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  autocheckers:
-    runs-on: ubuntu-latest
-
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    strategy:
-      matrix:
-        php-versions: ['8.1']
-
-    name: PHP checkers
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: none
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up dependencies
-        run: composer i
-
-      - name: Check auto loaders
-        run: bash ./build/autoloaderchecker.sh
-
-      - name: Check translations are JSON decodeable
-        run: php ./build/translation-checker.php
-
-      - name: Check translations do not contain triple dot but ellipsis
-        run: php ./build/triple-dot-checker.php
-
-      - name: Check .htaccess does not contain invalid changes
-        run: php ./build/htaccess-checker.php
-
-      - name: Check that all and only expected files are included
-        run: php ./build/files-checker.php
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, autocheckers]
-
-    if: always()
-
-    name: autocheckers-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.autocheckers.result != 'success' }}; then exit 1; fi

.github/workflows/block-merge-eol.yml

@@ -2,9 +2,6 @@
 #
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2022-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 
 name: Block merges for EOL
 
@@ -23,18 +20,18 @@ jobs:
 
     # Only run on stableXX branches
     if: startsWith( github.base_ref, 'stable')
-    runs-on: ubuntu-latest-low
+    runs-on: ubuntu-latest
 
     steps:
+      - name: Download updater config
+        run: curl https://raw.githubusercontent.com/nextcloud/updater_server/production/config/config.php --output config.php
+
       - name: Set server major version environment
         run: |
           # retrieve version number from branch reference
           server_major=$(echo "${{ github.base_ref }}" | sed -En 's/stable//p')
           echo "server_major=$server_major" >> $GITHUB_ENV
-          echo "current_month=$(date +%Y-%m)" >> $GITHUB_ENV
 
       - name: Checking if ${{ env.server_major }} is EOL
         run: |
-          curl -s https://raw.githubusercontent.com/nextcloud-releases/updater_server/production/config/major_versions.json \
-            | jq '.["${{ env.server_major }}"]["eol"] // "9999-99" | . >= "${{ env.current_month }}"' \
-            | grep -q true
+          php -r 'echo json_encode(require_once "config.php");' | jq --arg version "${{ env.server_major }}" '.stable[$version]["100"].eol // .beta[$version]["100"].eol' | grep --silent -i 'false'

.github/workflows/block-merge-freeze.yml

@@ -2,9 +2,6 @@
 #
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2022-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 
 name: Block merges during freezes
 
@@ -25,11 +22,11 @@ jobs:
 
     if: github.event.pull_request.draft == false
 
-    runs-on: ubuntu-latest-low
+    runs-on: ubuntu-latest
 
     steps:
       - name: Download version.php from ${{ github.base_ref }}
-        run: curl 'https://raw.githubusercontent.com/nextcloud/server/${{ github.base_ref }}/version.php' --output version.php
+        run: curl https://raw.githubusercontent.com/nextcloud/server/${{ github.base_ref }}/version.php --output version.php
 
       - name: Run check
         run: cat version.php | grep 'OC_VersionString' | grep -i -v 'RC'

.github/workflows/block-outdated-3rdparty.yml

@@ -1,55 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: Block merging with outdated 3rdparty/
-
-on:
-  pull_request:
-    types: [opened, ready_for_review, reopened, synchronize]
-
-permissions:
-  contents: read
-
-concurrency:
-  group: block-outdated-3rdparty-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  block-outdated-3rdparty:
-    name: Block merging with outdated 3rdparty/
-
-    runs-on: ubuntu-latest-low
-
-    steps:
-      - name: Check requirement
-        uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '3rdparty'
-              - 'version.php'
-
-      - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-
-      - name: 3rdparty commit hash on current branch
-        id: actual
-        run: |
-          echo "commit=$(git submodule status | grep ' 3rdparty' | egrep -o '[a-f0-9]{40}')" >> "$GITHUB_OUTPUT"
-
-      - name: Last 3rdparty commit on target branch
-        id: target
-        run: |
-          echo "commit=$(git ls-remote https://github.com/nextcloud/3rdparty refs/heads/${{ github.base_ref }} | awk '{ print $1}')" >> "$GITHUB_OUTPUT"
-
-      - name: Compare if 3rdparty commits are different
-        run: |
-          echo '3rdparty/ seems to not point to the last commit of the dedicated branch:'
-          echo 'Branch has: ${{ steps.actual.outputs.commit }}'
-          echo '${{ github.base_ref }} has: ${{ steps.target.outputs.commit }}'
-
-      - name: Fail if 3rdparty commits are different
-        if: ${{ steps.changes.outputs.src != 'false' && steps.actual.outputs.commit != steps.target.outputs.commit }}
-        run: |
-          exit 1

.github/workflows/block-unconventional-commits.yml

@@ -1,34 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: Block unconventional commits
-
-on:
-  pull_request:
-    types: [opened, ready_for_review, reopened, synchronize]
-
-permissions:
-  contents: read
-
-concurrency:
-  group: block-unconventional-commits-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  block-unconventional-commits:
-    name: Block unconventional commits
-
-    runs-on: ubuntu-latest-low
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-
-      - uses: webiny/action-conventional-commits@8bc41ff4e7d423d56fa4905f6ff79209a78776c7 # v1.3.0
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/command-compile.yml

@@ -1,11 +1,3 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2021-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
 name: Compile Command
 on:
   issue_comment:
@@ -23,46 +15,23 @@ jobs:
       arg1: ${{ steps.command.outputs.arg1 }}
       arg2: ${{ steps.command.outputs.arg2 }}
       head_ref: ${{ steps.comment-branch.outputs.head_ref }}
-      base_ref: ${{ steps.comment-branch.outputs.base_ref }}
 
     steps:
-      - name: Get repository from pull request comment
-        uses: actions/github-script@60a0d83039c74a4aee543508d2ffcb1c3799cdea # v7.0.1
-        id: get-repository
-        with:
-          github-token: ${{secrets.GITHUB_TOKEN}}
-          script: |
-            const pull = await github.rest.pulls.get({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              pull_number: context.issue.number
-            });
-
-            const repositoryName = pull.data.head?.repo?.full_name
-            console.log(repositoryName)
-            return repositoryName
-
-      - name: Disabled on forks
-        if: ${{ fromJSON(steps.get-repository.outputs.result) != github.repository }}
-        run: |
-          echo 'Can not execute /compile on forks'
-          exit 1
-
       - name: Check actor permission
-        uses: skjnldsv/check-actor-permission@69e92a3c4711150929bca9fcf34448c5bf5526e7 # v2
+        uses: skjnldsv/check-actor-permission@e591dbfe838300c007028e1219ca82cc26e8d7c5 # v2
         with:
           require: write
 
       - name: Add reaction on start
-        uses: peter-evans/create-or-update-comment@71345be0265236311c031f5c7866368bd1eff043 # v4.0.0
+        uses: peter-evans/create-or-update-comment@ca08ebd5dc95aa0cd97021e9708fcd6b87138c9b # v3.0.1
         with:
           token: ${{ secrets.COMMAND_BOT_PAT }}
           repository: ${{ github.event.repository.full_name }}
           comment-id: ${{ github.event.comment.id }}
-          reactions: '+1'
+          reactions: "+1"
 
       - name: Parse command
-        uses: skjnldsv/parse-command-comment@5c955203c52424151e6d0e58fb9de8a9f6a605a1 # v2
+        uses: skjnldsv/parse-command-comment@7cef1df370a99dfd5bf896d50121390c96785db8 # v2
         id: command
 
       # Init path depending on which command is run
@@ -70,111 +39,79 @@ jobs:
         id: git-path
         run: |
           if ${{ startsWith(steps.command.outputs.arg1, '/') }}; then
-            echo "path=${{steps.command.outputs.arg1}}" >> $GITHUB_OUTPUT
+            echo "path=${{ github.workspace }}${{steps.command.outputs.arg1}}" >> $GITHUB_OUTPUT
           else
-            echo "path=${{steps.command.outputs.arg2}}" >> $GITHUB_OUTPUT
+            echo "path=${{ github.workspace }}${{steps.command.outputs.arg2}}" >> $GITHUB_OUTPUT
           fi
 
       - name: Init branch
-        uses: xt0rted/pull-request-comment-branch@e8b8daa837e8ea7331c0003c9c316a64c6d8b0b1 # v3.0.0
+        uses: xt0rted/pull-request-comment-branch@d97294d304604fa98a2600a6e2f916a84b596dc7 # v1
         id: comment-branch
 
-      - name: Add reaction on failure
-        uses: peter-evans/create-or-update-comment@71345be0265236311c031f5c7866368bd1eff043 # v4.0.0
-        if: failure()
-        with:
-          token: ${{ secrets.COMMAND_BOT_PAT }}
-          repository: ${{ github.event.repository.full_name }}
-          comment-id: ${{ github.event.comment.id }}
-          reactions: '-1'
-
   process:
     runs-on: ubuntu-latest
     needs: init
 
     steps:
-      - name: Restore cached git repository
-        uses: buildjet/cache@3e70d19e31d6a8030aeddf6ed8dbe601f94d09f4 # v4.0.2
-        with:
-          path: .git
-          key: git-repo
-
       - name: Checkout ${{ needs.init.outputs.head_ref }}
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@8e5e7e5ab8b370d6c329ec480221332ada57f0ab # v3.5.2
         with:
-          persist-credentials: true
           token: ${{ secrets.COMMAND_BOT_PAT }}
           fetch-depth: 0
           ref: ${{ needs.init.outputs.head_ref }}
 
       - name: Setup git
         run: |
-          git config --local user.email 'nextcloud-command@users.noreply.github.com'
-          git config --local user.name 'nextcloud-command'
+          git config --local user.email "nextcloud-command@users.noreply.github.com"
+          git config --local user.name "nextcloud-command"
 
       - name: Read package.json node and npm engines version
-        uses: skjnldsv/read-package-engines-version-actions@06d6baf7d8f41934ab630e97d9e6c0bc9c9ac5e4 # v3
+        uses: skjnldsv/read-package-engines-version-actions@0ce2ed60f6df073a62a77c0a4958dd0fc68e32e7 # v2.1
         id: package-engines-versions
         with:
-          fallbackNode: '^20'
-          fallbackNpm: '^10'
+          fallbackNode: '^12'
+          fallbackNpm: '^6'
 
       - name: Set up node ${{ steps.package-engines-versions.outputs.nodeVersion }}
-        uses: actions/setup-node@39370e3970a6d050c480ffad4ff0ed4d3fdee5af # v4.1.0
+        uses: actions/setup-node@64ed1c7eab4cce3362f8c340dee64e5eaeef8f7c # v3
         with:
           node-version: ${{ steps.package-engines-versions.outputs.nodeVersion }}
           cache: npm
 
       - name: Set up npm ${{ steps.package-engines-versions.outputs.npmVersion }}
-        run: npm i -g 'npm@${{ steps.package-engines-versions.outputs.npmVersion }}'
-
-      - name: Rebase to ${{ needs.init.outputs.base_ref }}
-        if: ${{ contains(needs.init.outputs.arg1, 'rebase') }}
-        run: |
-          git fetch origin '${{ needs.init.outputs.base_ref }}:${{ needs.init.outputs.base_ref }}'
-          git rebase 'origin/${{ needs.init.outputs.base_ref }}'
+        run: npm i -g npm@"${{ steps.package-engines-versions.outputs.npmVersion }}"
 
       - name: Install dependencies & build
-        env:
-          CYPRESS_INSTALL_BINARY: 0
-          PUPPETEER_SKIP_DOWNLOAD: true
         run: |
           npm ci
           npm run build --if-present
 
-      - name: Commit default
-        if: ${{ !contains(needs.init.outputs.arg1, 'fixup') && !contains(needs.init.outputs.arg1, 'amend') }}
+      - name: Commit and push default
+        if: ${{ needs.init.outputs.arg1 != 'fixup' && needs.init.outputs.arg1 != 'amend' }}
         run: |
-          git add '${{ github.workspace }}${{ needs.init.outputs.git_path }}'
+          git add ${{ needs.init.outputs.git_path }}
           git commit --signoff -m 'chore(assets): Recompile assets'
+          git push origin ${{ needs.init.outputs.head_ref }}
 
-      - name: Commit fixup
-        if: ${{ contains(needs.init.outputs.arg1, 'fixup') }}
+      - name: Commit and push fixup
+        if: ${{ needs.init.outputs.arg1 == 'fixup' }}
         run: |
-          git add '${{ github.workspace }}${{ needs.init.outputs.git_path }}'
+          git add ${{ needs.init.outputs.git_path }}
           git commit --fixup=HEAD --signoff
+          git push origin ${{ needs.init.outputs.head_ref }}
 
-      - name: Commit amend
-        if: ${{ contains(needs.init.outputs.arg1, 'amend') }}
+      - name: Commit and push amend
+        if: ${{ needs.init.outputs.arg1 == 'amend' }}
         run: |
-          git add '${{ github.workspace }}${{ needs.init.outputs.git_path }}'
+          git add ${{ needs.init.outputs.git_path }}
           git commit --amend --no-edit --signoff
-          # Remove any [skip ci] from the amended commit
-          git commit --amend -m "$(git log -1 --format='%B' | sed '/\[skip ci\]/d')"
-
-      - name: Push normally
-        if: ${{ !contains(needs.init.outputs.arg1, 'rebase') && !contains(needs.init.outputs.arg1, 'amend') }}
-        run: git push origin '${{ needs.init.outputs.head_ref }}'
-
-      - name: Force push
-        if: ${{ contains(needs.init.outputs.arg1, 'rebase') || contains(needs.init.outputs.arg1, 'amend') }}
-        run: git push --force origin '${{ needs.init.outputs.head_ref }}'
+          git push --force origin ${{ needs.init.outputs.head_ref }}
 
       - name: Add reaction on failure
-        uses: peter-evans/create-or-update-comment@71345be0265236311c031f5c7866368bd1eff043 # v4.0.0
+        uses: peter-evans/create-or-update-comment@ca08ebd5dc95aa0cd97021e9708fcd6b87138c9b # v3.0.1
         if: failure()
         with:
           token: ${{ secrets.COMMAND_BOT_PAT }}
           repository: ${{ github.event.repository.full_name }}
           comment-id: ${{ github.event.comment.id }}
-          reactions: '-1'
+          reactions: "-1"

.github/workflows/command-pull-3rdparty.yml

@@ -1,68 +0,0 @@
-# SPDX-FileCopyrightText: 2022 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: Update 3rdparty command
-
-on:
-  issue_comment:
-    types: created
-
-permissions:
-  contents: read
-
-jobs:
-  rebase:
-    runs-on: ubuntu-latest
-    permissions:
-      contents: none
-
-    # On pull requests and if the comment starts with `/update-3rdparty`
-    if: github.event.issue.pull_request != '' && startsWith(github.event.comment.body, '/update-3rdparty')
-
-    steps:
-      - name: Add reaction on start
-        uses: peter-evans/create-or-update-comment@71345be0265236311c031f5c7866368bd1eff043 # v3.0.1
-        with:
-          token: ${{ secrets.COMMAND_BOT_PAT }}
-          repository: ${{ github.event.repository.full_name }}
-          comment-id: ${{ github.event.comment.id }}
-          reactions: '+1'
-
-      - name: Disabled on forks
-        if: ${{ github.event.pull_request.head.repo.full_name != github.repository }}
-        run: |
-          echo 'Can not execute /update-3rdparty on forks'
-          exit 1
-
-      - name: Init branch
-        uses: xt0rted/pull-request-comment-branch@e8b8daa837e8ea7331c0003c9c316a64c6d8b0b1 # v1
-        id: comment-branch
-
-      - name: Checkout ${{ steps.comment-branch.outputs.head_ref }}
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          fetch-depth: 0
-          token: ${{ secrets.COMMAND_BOT_PAT }}
-          ref: ${{ steps.comment-branch.outputs.head_ref }}
-
-      - name: Setup git
-        run: |
-          git config --local user.email 'nextcloud-command@users.noreply.github.com'
-          git config --local user.name 'nextcloud-command'
-
-      - name: Pull 3rdparty
-        run: git submodule foreach 'if [ "$sm_path" == "3rdparty" ]; then git pull origin '"'"'${{ github.event.issue.pull_request.base.ref }}'"'"'; fi'
-
-      - name: Commit and push changes
-        run: |
-          git add 3rdparty
-          git commit -s -m 'Update submodule 3rdparty to latest ${{ github.event.issue.pull_request.base.ref }}'
-          git push
-
-      - name: Add reaction on failure
-        uses: peter-evans/create-or-update-comment@71345be0265236311c031f5c7866368bd1eff043 # v3.0.1
-        if: failure()
-        with:
-          token: ${{ secrets.COMMAND_BOT_PAT }}
-          repository: ${{ github.event.repository.full_name }}
-          comment-id: ${{ github.event.comment.id }}
-          reactions: '-1'

.github/workflows/command-rebase.yml

@@ -0,0 +1,51 @@
+# This workflow is provided via the organization template repository
+#
+# https://github.com/nextcloud/.github
+# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
+
+name: Rebase command
+
+on:
+  issue_comment:
+    types: created
+
+permissions:
+  contents: read
+
+jobs:
+  rebase:
+    runs-on: ubuntu-latest
+    permissions:
+      contents: none
+
+    # On pull requests and if the comment starts with `/rebase`
+    if: github.event.issue.pull_request != '' && startsWith(github.event.comment.body, '/rebase')
+
+    steps:
+      - name: Add reaction on start
+        uses: peter-evans/create-or-update-comment@ca08ebd5dc95aa0cd97021e9708fcd6b87138c9b # v3.0.1
+        with:
+          token: ${{ secrets.COMMAND_BOT_PAT }}
+          repository: ${{ github.event.repository.full_name }}
+          comment-id: ${{ github.event.comment.id }}
+          reaction-type: "+1"
+
+      - name: Checkout the latest code
+        uses: actions/checkout@8e5e7e5ab8b370d6c329ec480221332ada57f0ab # v3.5.2
+        with:
+          fetch-depth: 0
+          token: ${{ secrets.COMMAND_BOT_PAT }}
+
+      - name: Automatic Rebase
+        uses: cirrus-actions/rebase@b87d48154a87a85666003575337e27b8cd65f691 # 1.8
+        env:
+          GITHUB_TOKEN: ${{ secrets.COMMAND_BOT_PAT }}
+
+      - name: Add reaction on failure
+        uses: peter-evans/create-or-update-comment@ca08ebd5dc95aa0cd97021e9708fcd6b87138c9b # v3.0.1
+        if: failure()
+        with:
+          token: ${{ secrets.COMMAND_BOT_PAT }}
+          repository: ${{ github.event.repository.full_name }}
+          comment-id: ${{ github.event.comment.id }}
+          reaction-type: "-1"

.github/workflows/cypress.yml

@@ -1,23 +1,16 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2023-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
 name: Cypress
 
-on: pull_request
-
-concurrency:
-  group: cypress-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
+on:
+  pull_request:
+  push:
+    branches:
+      - main
+      - master
+      - stable*
 
 env:
   # Adjust APP_NAME if your repository name is different
   APP_NAME: ${{ github.event.repository.name }}
-
   # Server requires head_ref instead of base_ref, as we want to test the PR branch
   BRANCH: ${{ github.head_ref || github.ref_name }}
 
@@ -28,27 +21,13 @@ jobs:
       nodeVersion: ${{ steps.versions.outputs.nodeVersion }}
       npmVersion: ${{ steps.versions.outputs.npmVersion }}
 
-    env:
-      # We'll install cypress in the cypress job
-      CYPRESS_INSTALL_BINARY: 0
-      PUPPETEER_SKIP_DOWNLOAD: true
-
     steps:
-      - name: Disabled on forks
-        if: ${{ github.event.pull_request.head.repo.full_name != github.repository }}
-        run: |
-          echo 'Can not run cypress on forks'
-          exit 1
-
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-        with:
-          # We need to checkout submodules for 3rdparty
-          submodules: true
+      - name: Checkout app
+        uses: actions/checkout@8e5e7e5ab8b370d6c329ec480221332ada57f0ab # v3.5.2
 
       - name: Check composer.json
         id: check_composer
-        uses: andstor/file-existence-action@076e0072799f4942c8bc574a82233e1e4d13e9d6 # v3.0.0
+        uses: andstor/file-existence-action@20b4d2e596410855db8f9ca21e96fbe18e12930b # v2
         with:
           files: "composer.json"
 
@@ -57,30 +36,27 @@ jobs:
         run: composer install --no-dev
 
       - name: Read package.json node and npm engines version
-        uses: skjnldsv/read-package-engines-version-actions@06d6baf7d8f41934ab630e97d9e6c0bc9c9ac5e4 # v3
+        uses: skjnldsv/read-package-engines-version-actions@0ce2ed60f6df073a62a77c0a4958dd0fc68e32e7 # v2.1
         id: versions
         with:
-          fallbackNode: "^20"
-          fallbackNpm: "^10"
+          fallbackNode: "^14"
+          fallbackNpm: "^7"
 
       - name: Set up node ${{ steps.versions.outputs.nodeVersion }}
-        uses: actions/setup-node@39370e3970a6d050c480ffad4ff0ed4d3fdee5af # v4.1.0
+        uses: actions/setup-node@64ed1c7eab4cce3362f8c340dee64e5eaeef8f7c # v3.6.0
         with:
           node-version: ${{ steps.versions.outputs.nodeVersion }}
 
       - name: Set up npm ${{ steps.versions.outputs.npmVersion }}
-        run: npm i -g 'npm@${{ steps.versions.outputs.npmVersion }}'
+        run: npm i -g npm@"${{ steps.versions.outputs.npmVersion }}"
 
       - name: Install node dependencies & build app
         run: |
           npm ci
           TESTING=true npm run build --if-present
 
-      - name: Show cypress version
-        run: npm run cypress:version
-
       - name: Save context
-        uses: buildjet/cache/save@v4
+        uses: buildjet/cache/save@e376f15c6ec6dc595375c78633174c7e5f92dc0e # v3
         with:
           key: cypress-context-${{ github.run_id }}
           path: ./
@@ -93,43 +69,38 @@ jobs:
       fail-fast: false
       matrix:
         # Run multiple copies of the current job in parallel
-        # Please increase the number or runners as your tests suite grows (0 based index for e2e tests)
-        containers: ["component", '0', '1', '2', '3', '4', '5', '6', '7']
-        # Hack as strategy.job-total includes the component and GitHub does not allow math expressions
-        # Always align this number with the total of e2e runners (max. index + 1)
-        total-containers: [8]
+        # Please increase the number or runners as your tests suite grows
+        containers: ["component", 1, 2]
 
     name: runner ${{ matrix.containers }}
 
     steps:
       - name: Restore context
-        uses: buildjet/cache/restore@v4
+        uses: buildjet/cache/restore@e376f15c6ec6dc595375c78633174c7e5f92dc0e # v3
         with:
           fail-on-cache-miss: true
           key: cypress-context-${{ github.run_id }}
           path: ./
 
       - name: Set up node ${{ needs.init.outputs.nodeVersion }}
-        uses: actions/setup-node@39370e3970a6d050c480ffad4ff0ed4d3fdee5af # v4.1.0
+        uses: actions/setup-node@64ed1c7eab4cce3362f8c340dee64e5eaeef8f7c # v3.6.0
         with:
           node-version: ${{ needs.init.outputs.nodeVersion }}
 
       - name: Set up npm ${{ needs.init.outputs.npmVersion }}
-        run: npm i -g 'npm@${{ needs.init.outputs.npmVersion }}'
-
-      - name: Install cypress
-        run: ./node_modules/cypress/bin/cypress install
+        run: npm i -g npm@"${{ needs.init.outputs.npmVersion }}"
 
       - name: Run ${{ matrix.containers == 'component' && 'component' || 'E2E' }} cypress tests
-        uses: cypress-io/github-action@7271bed2a170d73c0b08939cd192db51a1c46c50 # v6.7.10
+        uses: cypress-io/github-action@db1693016f23ccf9043f4b2428f9b04e5d502a73 # v5.8.1
         with:
-          # We already installed the dependencies in the init job
-          install: false
+          record: true
+          parallel: true
+          # cypress run type
           component: ${{ matrix.containers == 'component' }}
-          group: ${{ matrix.use-cypress-cloud && matrix.containers == 'component' && 'Run component' || matrix.use-cypress-cloud && 'Run E2E' || '' }}
+          group: Run ${{ matrix.containers == 'component' && 'component' || 'E2E' }}
           # cypress env
-          ci-build-id: ${{ matrix.use-cypress-cloud && format('{0}-{1}', github.sha, github.run_number) || '' }}
-          tag: ${{ matrix.use-cypress-cloud && github.event_name || '' }}
+          ci-build-id: ${{ github.sha }}-${{ github.run_number }}
+          tag: ${{ github.event_name }}
         env:
           # Needs to be prefixed with CYPRESS_
           CYPRESS_BRANCH: ${{ env.BRANCH }}
@@ -139,24 +110,20 @@ jobs:
           TESTING: true
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
           CYPRESS_RECORD_KEY: ${{ secrets.CYPRESS_RECORD_KEY }}
-          SPLIT: ${{ matrix.total-containers }}
-          SPLIT_INDEX: ${{ matrix.containers == 'component' && 0 || matrix.containers }}
 
-      - name: Upload snapshots and videos
-        uses: actions/upload-artifact@65c4c4a1ddee5b72f698fdd19549f0f0fb45cf08 # v4.6.0
+      - name: Upload snapshots
+        uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v3.1.2
         if: always()
         with:
-          name: snapshots_videos_${{ matrix.containers }}
-          path: |
-            cypress/snapshots
-            cypress/videos
+          name: snapshots_${{ matrix.containers }}
+          path: cypress/snapshots
 
       - name: Extract NC logs
         if: failure() && matrix.containers != 'component'
-        run: docker logs nextcloud-cypress-tests_${{ env.APP_NAME }} > nextcloud.log
+        run: docker logs nextcloud-cypress-tests-${{ env.APP_NAME }} > nextcloud.log
 
       - name: Upload NC logs
-        uses: actions/upload-artifact@65c4c4a1ddee5b72f698fdd19549f0f0fb45cf08 # v4.6.0
+        uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v3.1.2
         if: failure() && matrix.containers != 'component'
         with:
           name: nc_logs_${{ matrix.containers }}
@@ -164,17 +131,17 @@ jobs:
 
       - name: Create data dir archive
         if: failure() && matrix.containers != 'component'
-        run: docker exec nextcloud-cypress-tests_${{ env.APP_NAME }} tar -cvjf - data > data.tar
+        run: docker exec nextcloud-cypress-tests-server tar -cvjf - data > data.tar
 
       - name: Upload data dir archive
-        uses: actions/upload-artifact@65c4c4a1ddee5b72f698fdd19549f0f0fb45cf08 # v4.6.0
+        uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v3.1.2
         if: failure() && matrix.containers != 'component'
         with:
           name: nc_data_${{ matrix.containers }}
           path: data.tar
 
   summary:
-    runs-on: ubuntu-latest-low
+    runs-on: ubuntu-latest
     needs: [init, cypress]
 
     if: always()

.github/workflows/dependabot-approve-merge.yml

@@ -2,9 +2,6 @@
 #
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2021-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 
 name: Dependabot
 
@@ -24,20 +21,14 @@ concurrency:
 
 jobs:
   auto-approve-merge:
-    if: github.actor == 'dependabot[bot]' || github.actor == 'renovate[bot]'
-    runs-on: ubuntu-latest-low
+    if: github.actor == 'dependabot[bot]'
+    runs-on: ubuntu-latest
     permissions:
       # for hmarr/auto-approve-action to approve PRs
       pull-requests: write
 
     steps:
-      - name: Disabled on forks
-        if: ${{ github.event.pull_request.head.repo.full_name != github.repository }}
-        run: |
-          echo 'Can not approve PRs from forks'
-          exit 1
-
-      # GitHub actions bot approve
+      # Github actions bot approve
       - uses: hmarr/auto-approve-action@b40d6c9ed2fa10c9a2749eca7eb004418a705501 # v2
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/files-external-ftp.yml

@@ -1,121 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: PHPUnit files_external FTP
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-concurrency:
-  group: files-external-ftp-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - 'apps/files_external/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  files-external-ftp:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      # do not stop on another job's failure
-      fail-fast: false
-      matrix:
-        php-versions: ['8.1', '8.4']
-        ftpd: ['proftpd', 'vsftpd', 'pure-ftpd']
-        include:
-          - php-versions: '8.1'
-            coverage: ${{ github.event_name != 'pull_request' }}
-
-    name: php${{ matrix.php-versions }}-${{ matrix.ftpd }}
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up ftpd
-        run: |
-          sudo mkdir /tmp/ftp
-          sudo chmod -R 0777 /tmp/ftp
-          if [[ "${{ matrix.ftpd }}" == 'proftpd' ]]; then echo '$6$Q7V2n3q2GRVv5YeQ$/AhLu07H76Asojy7bxGXMY1caKLAbp5Vt82LOZYMkD/8uDzyMAEXwk0c1Bdz1DkBsk2Vh/9SF130mOPavRGMo.' > /tmp/secret.txt; fi
-          if [[ "${{ matrix.ftpd }}" == 'proftpd' ]]; then echo 'FTP_ROOT=/home/test' > $GITHUB_ENV; fi
-          if [[ "${{ matrix.ftpd }}" == 'proftpd' ]]; then docker run --name ftp -d --net host -e PASV_ADDRESS=127.0.0.1 -e FTPUSER_NAME=test -v /tmp/secret.txt:/run/secrets/ftp-user-password-secret -v /tmp/ftp:/home/test instantlinux/proftpd; fi
-          if [[ "${{ matrix.ftpd }}" == 'vsftpd' ]]; then docker run --name ftp -d --net host -e FTP_USER=test -e FTP_PASS=test -e PASV_ADDRESS=127.0.0.1 -v /tmp/ftp:/home/vsftpd/test fauria/vsftpd; fi
-          if [[ "${{ matrix.ftpd }}" == 'pure-ftpd' ]]; then docker run --name ftp -d --net host -e "PUBLICHOST=localhost" -e FTP_USER_NAME=test -e FTP_USER_PASS=test -e FTP_USER_HOME=/home/test -v /tmp/ftp:/home/test -v /tmp/ftp:/etc/pure-ftpd/passwd stilliard/pure-ftpd; fi
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up Nextcloud
-        run: |
-          composer install
-          mkdir data
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          ./occ app:enable --force files_external
-          echo "<?php return ['run' => true,'host' => 'localhost','user' => 'test','password' => 'test', 'root' => '${{ env.FTP_ROOT }}'];" > apps/files_external/tests/config.ftp.php
-
-      - name: smoketest ftp
-        run: |
-          php -r 'var_dump(file_put_contents("ftp://test:test@localhost${{ env.FTP_ROOT }}/ftp.txt", "asd"));'
-          php -r 'var_dump(file_get_contents("ftp://test:test@localhost${{ env.FTP_ROOT }}/ftp.txt"));'
-          php -r 'var_dump(mkdir("ftp://test:test@localhost${{ env.FTP_ROOT }}/asdads"));'
-          ls -l /tmp/ftp
-          [ -f /tmp/ftp/ftp.txt ]
-
-      - name: PHPUnit
-        run: composer run test:files_external -- \
-          apps/files_external/tests/Storage/FtpTest.php \
-          ${{ matrix.coverage && ' --coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-files-external-ftp
-
-      - name: ftpd logs
-        if: always()
-        run: |
-          docker logs ftp
-
-  ftp-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes, files-external-ftp]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.files-external-ftp.result != 'success' }}; then exit 1; fi

.github/workflows/files-external-s3.yml

@@ -1,187 +0,0 @@
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: PHPUnit files_external S3
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-concurrency:
-  group: files-external-s3-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - 'apps/files_external/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  files-external-s3-minio:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      matrix:
-        php-versions: ['8.1', '8.2', '8.3', '8.4']
-        include:
-          - php-versions: '8.2'
-            coverage: ${{ github.event_name != 'pull_request' }}
-
-    name: php${{ matrix.php-versions }}-s3
-
-    services:
-      minio:
-        image: bitnami/minio
-        env:
-          MINIO_ROOT_USER: nextcloud
-          MINIO_ROOT_PASSWORD: bWluaW8tc2VjcmV0LWtleS1uZXh0Y2xvdWQ=
-          MINIO_DEFAULT_BUCKETS: nextcloud
-        ports:
-          - '9000:9000'
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up Nextcloud
-        env:
-          OBJECT_STORE_KEY: nextcloud
-          OBJECT_STORE_SECRET: bWluaW8tc2VjcmV0LWtleS1uZXh0Y2xvdWQ=
-        run: |
-          composer install
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          ./occ app:enable --force files_external
-          echo "<?php return ['run' => true, 'secret' => 'actually-not-secret', 'passwordsalt' => 'actually-not-secret', 'hostname' => 'localhost','key' => '$OBJECT_STORE_KEY','secret' => '$OBJECT_STORE_SECRET', 'bucket' => 'bucket', 'port' => 9000, 'use_ssl' => false, 'autocreate' => true, 'use_path_style' => true];" > apps/files_external/tests/config.amazons3.php
-
-      - name: Wait for S3
-        run: |
-          sleep 10
-          curl -f -m 1 --retry-connrefused --retry 10 --retry-delay 10 http://localhost:9000/minio/health/ready
-
-      - name: PHPUnit
-        run: composer run test:files_external -- \
-          apps/files_external/tests/Storage/Amazons3Test.php \
-          apps/files_external/tests/Storage/VersionedAmazonS3Test.php \
-          ${{ matrix.coverage && ' --coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-files-external-s3
-
-      - name: S3 logs
-        if: always()
-        run: |
-          docker ps -a
-          docker ps -aq | while read container ; do IMAGE=$(docker inspect --format='{{.Config.Image}}' $container); echo $IMAGE; docker logs $container; echo "\n\n" ; done
-
-  files-external-s3-localstack:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      matrix:
-        php-versions: ['8.1', '8.2', '8.3']
-        include:
-          - php-versions: '8.3'
-            coverage: true
-
-    name: php${{ matrix.php-versions }}-s3
-
-    services:
-      localstack:
-        env:
-          SERVICES: s3
-          DEBUG: 1
-        image: localstack/localstack
-        ports:
-          - "4566:4566"
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up Nextcloud
-        run: |
-          composer install
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          ./occ app:enable --force files_external
-          echo "<?php return ['run' => true,'hostname' => 'localhost','key' => 'ignored','secret' => 'ignored', 'bucket' => 'bucket', 'port' => 4566, 'use_ssl' => false, 'autocreate' => true, 'use_path_style' => true];" > apps/files_external/tests/config.amazons3.php
-
-      - name: PHPUnit
-        run: composer run test:files_external -- \
-          apps/files_external/tests/Storage/Amazons3Test.php \
-          apps/files_external/tests/Storage/VersionedAmazonS3Test.php \
-          ${{ matrix.coverage && ' --coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-files-external-s3
-
-      - name: S3 logs
-        if: always()
-        run: |
-          docker ps -a
-          docker ps -aq | while read container ; do IMAGE=$(docker inspect --format='{{.Config.Image}}' $container); echo $IMAGE; docker logs $container; echo "\n\n" ; done
-
-  s3-external-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes, files-external-s3-minio, files-external-s3-localstack]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && (needs.files-external-s3-minio.result != 'success' || needs.files-external-s3-localstack.result != 'success') }}; then exit 1; fi

.github/workflows/files-external-sftp.yml

@@ -1,111 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: PHPUnit files_external sFTP
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-concurrency:
-  group: files-external-sftp-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - 'apps/files_external/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  files-external-sftp:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      # do not stop on another job's failure
-      fail-fast: false
-      matrix:
-        php-versions: ['8.1', '8.4']
-        sftpd: ['openssh']
-        include:
-          - php-versions: '8.1'
-            coverage: ${{ github.event_name != 'pull_request' }}
-
-    name: php${{ matrix.php-versions }}-${{ matrix.sftpd }}
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up sftpd
-        run: |
-          sudo mkdir /tmp/sftp
-          sudo chown -R 0777 /tmp/sftp
-          if [[ '${{ matrix.sftpd }}' == 'openssh' ]]; then docker run -p 2222:22 --name sftp -d -v /tmp/sftp:/home/test atmoz/sftp 'test:test:::data'; fi
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up Nextcloud
-        run: |
-          composer install
-          mkdir data
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          ./occ app:enable --force files_external
-          echo "<?php return ['run' => true, 'host' => 'localhost:2222','user' => 'test','password' => 'test', 'root' => 'data'];" > apps/files_external/tests/config.sftp.php
-
-      - name: PHPUnit
-        run: composer run test:files_external -- \
-          apps/files_external/tests/Storage/SftpTest.php \
-          apps/files_external/tests/Storage/SFTP_KeyTest.php \
-          ${{ matrix.coverage && ' --coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-files-external-sftp
-
-      - name: sftpd logs
-        if: always()
-        run: |
-          ls -l /tmp/sftp
-          docker logs sftp
-
-  sftp-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes, files-external-sftp]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.files-external-sftp.result != 'success' }}; then exit 1; fi

.github/workflows/files-external-smb-kerberos.yml

@@ -1,101 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: Samba Kerberos SSO
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-concurrency:
-  group: files-external-smb-kerberos-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - 'apps/files_external/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  files-external-smb-kerberos:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    name: smb-kerberos-sso
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Checkout user_saml
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          repository: nextcloud/user_saml
-          path: apps/user_saml
-
-      - name: Install user_saml
-        run: |
-          cd apps/user_saml
-          composer i
-          cd ../..
-
-      - name: Pull images
-        run: |
-          docker pull ghcr.io/icewind1991/samba-krb-test-dc
-          docker pull ghcr.io/icewind1991/samba-krb-test-apache
-          docker pull ghcr.io/icewind1991/samba-krb-test-client
-          docker tag ghcr.io/icewind1991/samba-krb-test-dc icewind1991/samba-krb-test-dc
-          docker tag ghcr.io/icewind1991/samba-krb-test-apache icewind1991/samba-krb-test-apache
-          docker tag ghcr.io/icewind1991/samba-krb-test-client icewind1991/samba-krb-test-client
-
-      - name: Setup AD-DC
-        run: |
-          DC_IP=$(apps/files_external/tests/sso-setup/start-dc.sh)
-          sleep 1
-          apps/files_external/tests/sso-setup/start-apache.sh $DC_IP $PWD
-          echo "DC_IP=$DC_IP" >> $GITHUB_ENV
-
-      - name: Set up Nextcloud
-        run: |
-          apps/files_external/tests/sso-setup/setup-sso-nc.sh
-
-      - name: Test SSO
-        run: |
-          apps/files_external/tests/sso-setup/test-sso-smb.sh ${{ env.DC_IP }}
-
-      - name: Show logs
-        if: always()
-        run: |
-          FILEPATH=$(docker exec --user 33 apache ./occ log:file | grep "Log file:" | cut -d' ' -f3)
-          echo "$FILEPATH:"
-          docker exec --user 33 apache cat $FILEPATH
-
-  sftp-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes, files-external-smb-kerberos]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.files-external-smb-kerberos.result != 'success' }}; then exit 1; fi

.github/workflows/files-external-smb.yml

@@ -1,110 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: PHPUnit files_external SMB
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-concurrency:
-  group: files-external-smb-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - 'apps/files_external/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  files-external-smb:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      matrix:
-        php-versions: ['8.1']
-        include:
-          - php-versions: '8.1'
-            coverage: ${{ github.event_name != 'pull_request' }}
-
-    name: php${{ matrix.php-versions }}-smb
-
-    services:
-      samba:
-        image: ghcr.io/nextcloud/continuous-integration-samba:latest
-        ports:
-          - 445:445
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, smbclient, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up smbclient
-        # This is needed as icewind/smb php library for notify
-        run: sudo apt-get install -y smbclient
-
-      - name: Set up Nextcloud
-        run: |
-          composer install
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          ./occ config:system:set --value true --type boolean allow_local_remote_servers
-          ./occ app:enable --force files_external
-          echo "<?php return ['run'=>true, 'host'=>'localhost', 'user'=>'test', 'password'=>'test', 'root'=>'', 'share'=>'public'];" > apps/files_external/tests/config.smb.php
-
-      - name: Wait for smb
-        run: |
-          apps/files_external/tests/env/wait-for-connection 127.0.0.1 445 60
-
-      - name: PHPUnit
-        run: composer run test:files_external -- --verbose \
-          apps/files_external/tests/Storage/SmbTest.php \
-          ${{ matrix.coverage && ' --coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@13ce06bfc6bbe3ecf90edbbf1bc32fe5978ca1d3 # v4.1.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-files-external-smb
-
-  files-external-smb-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes, files-external-smb]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.files-external-smb.result != 'success' }}; then exit 1; fi

.github/workflows/files-external-webdav.yml

@@ -1,107 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: PHPUnit files_external WebDAV
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-concurrency:
-  group: files-external-webdav-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - 'apps/files_external/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  files-external-webdav-apache:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      matrix:
-        php-versions: ['8.1', '8.2', '8.3', '8.4']
-        include:
-          - php-versions: '8.2'
-            coverage: ${{ github.event_name != 'pull_request' }}
-
-    name: php${{ matrix.php-versions }}-webdav
-
-    services:
-      apache:
-        image: ghcr.io/nextcloud/continuous-integration-webdav-apache:latest
-        ports:
-          - 8081:80
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up Nextcloud
-        run: |
-          composer install
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          ./occ config:system:set --value true --type boolean allow_local_remote_servers
-          ./occ app:enable --force files_external
-          echo "<?php return ['run' => true, 'host' => 'localhost:8081/webdav/', 'user' => 'test', 'password'=>'pass', 'root' => '', 'wait' => 0];" > apps/files_external/tests/config.webdav.php
-
-      - name: Wait for WebDAV
-        run: |
-          sleep 5
-          curl -f -m 1 --retry-connrefused --retry 10 --retry-delay 10 http://test:pass@localhost:8081/webdav/
-
-      - name: PHPUnit
-        run: composer run test:files_external -- --verbose \
-          apps/files_external/tests/Storage/WebdavTest.php \
-          ${{ matrix.coverage && ' --coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@13ce06bfc6bbe3ecf90edbbf1bc32fe5978ca1d3 # v4.1.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-files-external-webdav
-
-  files-external-webdav-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes, files-external-webdav-apache]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.files-external-webdav-apache.result != 'success' }}; then exit 1; fi

.github/workflows/files-external.yml

@@ -1,95 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: PHPUnit files_external generic
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-concurrency:
-  group: files-external-generic-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - 'apps/files_external/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - 'composer.json'
-              - 'composer.lock'
-
-  files-external-generic:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      matrix:
-        php-versions: ['8.1', '8.2', '8.3', '8.4']
-        include:
-          - php-versions: '8.2'
-            coverage: ${{ github.event_name != 'pull_request' }}
-
-    name: php${{ matrix.php-versions }}-generic
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up Nextcloud
-        env:
-          OBJECT_STORE_KEY: nextcloud
-          OBJECT_STORE_SECRET: bWluaW8tc2VjcmV0LWtleS1uZXh0Y2xvdWQ=
-        run: |
-          composer install
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          ./occ app:enable --force files_external
-
-      - name: PHPUnit
-        run: composer run test:files_external -- \
-          ${{ matrix.coverage && ' --coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-files-external-generic
-
-  files-external-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes, files-external-generic ]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.files-external-generic.result != 'success' }}; then exit 1; fi

.github/workflows/fixup.yml

@@ -2,9 +2,6 @@
 #
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2021-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 
 name: Block fixup and squash commits
 
@@ -27,10 +24,10 @@ jobs:
       pull-requests: write
     name: Block fixup and squash commits
 
-    runs-on: ubuntu-latest-low
+    runs-on: ubuntu-latest
 
     steps:
       - name: Run check
-        uses: skjnldsv/block-fixup-merge-action@c138ea99e45e186567b64cf065ce90f7158c236a # v2
+        uses: skjnldsv/block-fixup-merge-action@42d26e1b536ce61e5cf467d65fb76caf4aa85acf # v1
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/ftp.yml

@@ -0,0 +1,82 @@
+name: FTP
+on:
+  push:
+    branches:
+      - master
+      - stable*
+    paths:
+      - 'apps/files_external/**'
+  pull_request:
+    paths:
+      - 'apps/files_external/**'
+
+env:
+  APP_NAME: files_external
+
+jobs:
+  ftp-tests:
+    runs-on: ubuntu-latest
+
+    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
+
+    strategy:
+      # do not stop on another job's failure
+      fail-fast: false
+      matrix:
+        php-versions: ['8.0']
+        ftpd: ['proftpd', 'vsftpd', 'pure-ftpd']
+
+    name: php${{ matrix.php-versions }}-${{ matrix.ftpd }}
+
+    steps:
+      - name: Checkout server
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+
+      - name: Set up ftpd
+        run: |
+          sudo mkdir /tmp/ftp
+          sudo chown -R 0777 /tmp/ftp
+          if [[ "${{ matrix.ftpd }}" == 'proftpd' ]]; then docker run --name ftp -d --net host -e FTP_USERNAME=test -e FTP_PASSWORD=test -v /tmp/ftp:/home/test hauptmedia/proftpd; fi
+          if [[ "${{ matrix.ftpd }}" == 'vsftpd' ]]; then docker run --name ftp -d --net host -e FTP_USER=test -e FTP_PASS=test -e PASV_ADDRESS=127.0.0.1 -v /tmp/ftp:/home/vsftpd/test fauria/vsftpd; fi
+          if [[ "${{ matrix.ftpd }}" == 'pure-ftpd' ]]; then docker run --name ftp -d --net host -e "PUBLICHOST=localhost" -e FTP_USER_NAME=test -e FTP_USER_PASS=test -e FTP_USER_HOME=/home/test -v /tmp/ftp2:/home/test -v /tmp/ftp2:/etc/pure-ftpd/passwd stilliard/pure-ftpd; fi
+      - name: Set up php ${{ matrix.php-versions }}
+        uses: shivammathur/setup-php@v2
+        with:
+          php-version: ${{ matrix.php-versions }}
+          tools: phpunit:9
+          extensions: mbstring, fileinfo, intl, sqlite, pdo_sqlite, zip, gd
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Set up Nextcloud
+        run: |
+          mkdir data
+          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
+          ./occ app:enable --force ${{ env.APP_NAME }}
+          php -S localhost:8080 &
+      - name: smoketest ftp
+        run: |
+          php -r 'var_dump(file_put_contents("ftp://test:test@localhost/ftp.txt", "asd"));'
+          php -r 'var_dump(file_get_contents("ftp://test:test@localhost/ftp.txt"));'
+          php -r 'var_dump(mkdir("ftp://test:test@localhost/asdads"));'
+          ls -l /tmp/ftp
+      - name: PHPUnit
+        run: |
+          echo "<?php return ['run' => true,'host' => 'localhost','user' => 'test','password' => 'test', 'root' => ''];" > apps/${{ env.APP_NAME }}/tests/config.ftp.php
+          phpunit --configuration tests/phpunit-autotest-external.xml apps/files_external/tests/Storage/FtpTest.php
+      - name: ftpd logs
+        if: always()
+        run: |
+          docker logs ftp
+
+  ftp-summary:
+    runs-on: ubuntu-latest
+    needs: ftp-tests
+
+    if: always()
+
+    steps:
+      - name: Summary status
+        run: if ${{ needs.ftp-tests.result != 'success' }}; then exit 1; fi

.github/workflows/integration-dav.yml

@@ -1,125 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: DAV integration tests
-on:
-  pull_request:
-
-concurrency:
-  group: integration-caldav-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/*.php'
-              - '**/lib/**'
-              - '**/tests/**'
-              - '**/vendor-bin/**'
-              - 'build/integration/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-
-  integration-caldav:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: needs.changes.outputs.src != 'false' && github.repository_owner != 'nextcloud-gmbh'
-
-    strategy:
-      # do not stop on another job's failure
-      fail-fast: false
-      matrix:
-        php-versions: ['8.1']
-        endpoint: ['old', 'new']
-        service: ['CalDAV', 'CardDAV']
-
-    name: ${{ matrix.service }} (${{ matrix.endpoint }} endpoint) php${{ matrix.php-versions }}
-
-    steps:
-        - name: Checkout server
-          uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-          with:
-            submodules: true
-
-        - name: Set up php ${{ matrix.php-versions }}
-          uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-          with:
-            php-version: ${{ matrix.php-versions }}
-            # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-            extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-            coverage: 'none'
-            ini-file: development
-          env:
-            GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-        - name: Set up Python
-          uses: LizardByte/setup-python-action@master
-          with:
-            python-version: '2.7'
-
-        - name: Set up CalDAVTester
-          run: |
-            git clone --depth=1 https://github.com/apple/ccs-caldavtester.git CalDAVTester
-            git clone --depth=1 https://github.com/apple/ccs-pycalendar.git pycalendar
-
-        - name: Set up Nextcloud
-          run: |
-            mkdir data
-            ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
-            # disable the trashbin, so recurrent deletion of the same object works
-            ./occ config:app:set dav calendarRetentionObligation --value=0
-            # Prepare users
-            OC_PASS=user01 ./occ user:add --password-from-env user01
-            OC_PASS=user02 ./occ user:add --password-from-env user02
-            # Prepare calendars
-            ./occ dav:create-calendar user01 calendar
-            ./occ dav:create-calendar user01 shared
-            ./occ dav:create-calendar user02 calendar
-            # Prepare address books
-            ./occ dav:create-addressbook user01 addressbook
-            ./occ dav:create-addressbook user02 addressbook
-
-        - name: Run Nextcloud
-          run: |
-            php -S localhost:8888 &
-
-        - name: Run CalDAVTester
-          run: |
-            cp "apps/dav/tests/testsuits/caldavtest/serverinfo-${{ matrix.endpoint }}${{ matrix.endpoint == 'old' && (matrix.service == 'CardDAV' && '-carddav' || '-caldav') || '' }}-endpoint.xml" "apps/dav/tests/testsuits/caldavtest/serverinfo.xml"
-            pushd CalDAVTester
-            PYTHONPATH="../pycalendar/src" python testcaldav.py --print-details-onfail --basedir "../apps/dav/tests/testsuits/caldavtest" -o cdt.txt \
-              "${{ matrix.service }}/current-user-principal.xml" \
-              "${{ matrix.service }}/sync-report.xml" \
-              ${{ matrix.endpoint == 'new' && format('{0}/sharing-{1}.xml', matrix.service, matrix.service == 'CalDAV' && 'calendars' || 'addressbooks') || ';' }}
-            popd
-
-        - name: Print Nextcloud logs
-          if: always()
-          run: |
-            cat data/nextcloud.log
-
-  caldav-integration-summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, integration-caldav]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.integration-caldav.result != 'success' }}; then exit 1; fi

.github/workflows/integration-litmus.yml

@@ -1,112 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: Litmus integration tests
-on:
-  pull_request:
-
-concurrency:
-  group: integration-litmus-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/*.php'
-              - '**/lib/**'
-              - '**/tests/**'
-              - '**/vendor-bin/**'
-              - 'build/integration/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-
-  integration-litmus:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: needs.changes.outputs.src != 'false' && github.repository_owner != 'nextcloud-gmbh'
-
-    strategy:
-      # do not stop on another job's failure
-      fail-fast: false
-      matrix:
-        php-versions: ['8.1']
-        endpoint: ['webdav', 'dav']
-
-    name: Litmus WebDAV ${{ matrix.endpoint }}
-
-    steps:
-        - name: Checkout server
-          uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-          with:
-            submodules: true
-
-        - name: Set up php ${{ matrix.php-versions }}
-          uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-          with:
-            php-version: ${{ matrix.php-versions }}
-            # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-            extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-            coverage: 'none'
-            ini-file: development
-          env:
-            GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-        - name: Set up Nextcloud
-          run: |
-            mkdir data
-            ./occ maintenance:install \
-              --verbose \
-              --database=sqlite \
-              --database-name=nextcloud \
-              --database-user=root \
-              --database-pass=rootpassword \
-              --admin-user admin \
-              --admin-pass admin
-            ./occ config:system:set trusted_domains 2 --value=host.docker.internal:8080
-
-        - name: Run Nextcloud
-          run: |
-            php -S 0.0.0.0:8080 &
-
-        - name: Run Litmus test
-          run: |
-            docker run \
-            --rm \
-            --add-host=host.docker.internal:host-gateway \
-            ghcr.io/nextcloud/continuous-integration-litmus-php8.3:latest \
-            bash -c '\
-              cd /tmp/litmus/litmus-0.13;
-              make URL=http://host.docker.internal:8080/remote.php/${{ matrix.endpoint }}${{ matrix.endpoint == 'dav' && '/files/admin' || ''}} CREDS="admin admin" TESTS="basic copymove props largefile" check;
-              status=$?;
-              cat debug.log;
-              exit $status;'
-
-        - name: Print Nextcloud logs
-          if: always()
-          run: cat data/nextcloud.log
-
-  integration-litmus-summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, integration-litmus]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.integration-litmus.result != 'success' }}; then exit 1; fi

.github/workflows/integration-s3-primary.yml

@@ -1,119 +0,0 @@
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: S3 primary storage integration tests
-on:
-  pull_request:
-
-concurrency:
-  group: integration-s3-primary-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/*.php'
-              - '**/lib/**'
-              - '**/tests/**'
-              - '**/vendor-bin/**'
-              - 'build/integration/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-
-  integration-s3-primary:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: needs.changes.outputs.src != 'false' && github.repository_owner != 'nextcloud-gmbh'
-
-    strategy:
-      # do not stop on another job's failure
-      fail-fast: false
-      matrix:
-        php-versions: ['8.1']
-        key: ['objectstore', 'objectstore_multibucket']
-
-    name: php${{ matrix.php-versions }}-${{ matrix.key }}-minio
-
-    services:
-      redis:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-        ports:
-          - 6379:6379/tcp
-      minio:
-        image: bitnami/minio
-        env:
-          MINIO_ROOT_USER: nextcloud
-          MINIO_ROOT_PASSWORD: bWluaW8tc2VjcmV0LWtleS1uZXh0Y2xvdWQ=
-          MINIO_DEFAULT_BUCKETS: nextcloud
-        ports:
-          - "9000:9000"
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: 'none'
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Wait for S3
-        run: |
-          sleep 10
-          curl -f -m 1 --retry-connrefused --retry 10 --retry-delay 10 http://localhost:9000/minio/health/ready
-
-      - name: Set up Nextcloud
-        run: |
-          mkdir data
-          echo '<?php $CONFIG=["${{ matrix.key }}" => ["class" => "OC\Files\ObjectStore\S3", "arguments" => ["bucket" => "nextcloud", "autocreate" => true, "key" => "nextcloud", "secret" => "bWluaW8tc2VjcmV0LWtleS1uZXh0Y2xvdWQ=", "hostname" => "localhost", "port" => 9000, "use_ssl" => false, "use_path_style" => true, "uploadPartSize" => 52428800]]];' > config/config.php
-          echo '<?php $CONFIG=["redis" => ["host" => "localhost", "port" => 6379], "memcache.local" => "\OC\Memcache\Redis", "memcache.distributed" => "\OC\Memcache\Redis"];' > config/redis.config.php
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
-          php -f index.php
-
-      - name: Integration
-        run: |
-          cd build/integration
-          bash run.sh --tags "~@failure-s3" dav_features/webdav-related.feature
-
-      - name: S3 logs
-        if: always()
-        run: |
-          cat data/nextcloud.log
-          docker ps -a
-          docker ps -aq | while read container ; do IMAGE=$(docker inspect --format='{{.Config.Image}}' $container); echo $IMAGE; docker logs $container; echo "\n\n" ; done
-
-
-  s3-primary-integration-summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, integration-s3-primary]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.integration-s3-primary.result != 'success' }}; then exit 1; fi

.github/workflows/integration-sqlite.yml

@@ -1,170 +0,0 @@
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: Integration sqlite
-
-on:
-  pull_request:
-  push:
-    branches:
-      - main
-      - master
-      - stable*
-
-permissions:
-  contents: read
-
-concurrency:
-  group: integration-sqlite-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/*.php'
-              - '**/lib/**'
-              - '**/tests/**'
-              - '**/vendor-bin/**'
-              - 'build/integration/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - 'core/shipped.json'
-
-  integration-sqlite:
-    runs-on: ubuntu-latest
-
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    strategy:
-      fail-fast: false
-      matrix:
-        test-suite:
-          - 'capabilities_features'
-          - 'collaboration_features'
-          - 'comments_features'
-          - 'dav_features'
-          - 'features'
-          - 'federation_features'
-          - '--tags ~@large files_features'
-          - 'filesdrop_features'
-          - 'file_conversions'
-          - 'openldap_features'
-          - 'openldap_numerical_features'
-          - 'ldap_features'
-          - 'remoteapi_features'
-          - 'setup_features'
-          - 'sharees_features'
-          - 'sharing_features'
-          - 'videoverification_features'
-
-        php-versions: ['8.1']
-        spreed-versions: ['main']
-
-    services:
-      redis:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-        ports:
-          - 6379:6379/tcp
-      openldap:
-        image: ghcr.io/nextcloud/continuous-integration-openldap:openldap-7
-        ports:
-          - 389:389
-        env:
-          SLAPD_DOMAIN: nextcloud.ci
-          SLAPD_ORGANIZATION: Nextcloud
-          SLAPD_PASSWORD: admin
-          SLAPD_ADDITIONAL_MODULES: memberof
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-        with:
-          submodules: true
-
-      - name: Checkout Talk app
-        if: ${{ matrix.test-suite == 'videoverification_features' }}
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-        with:
-          repository: nextcloud/spreed
-          path: apps/spreed
-          ref: ${{ matrix.spreed-versions }}
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, imagick, intl, json, ldap, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: none
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up production dependencies
-        run: composer i --no-dev
-
-      - name: Set up behat dependencies
-        working-directory: build/integration
-        run: composer i
-
-      - name: Set up Talk dependencies
-        if: ${{ matrix.test-suite == 'videoverification_features' }}
-        working-directory: apps/spreed
-        run: composer i --no-dev
-
-      - name: Set up Nextcloud
-        run: |
-          mkdir data
-          ./occ maintenance:install --verbose ${{ contains(matrix.test-suite,'ldap') && '--data-dir=/dev/shm/nc_int' || '' }} --database=sqlite --database-name=nextcloud --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
-          ./occ config:system:set hashing_default_password --value=true --type=boolean
-
-      - name: Configure caching
-        if: ${{ contains(matrix.test-suite,'ldap') }}
-        run: |
-          ./occ config:system:set redis host --value=localhost
-          ./occ config:system:set redis port --value=6379 --type=integer
-          ./occ config:system:set redis timeout --value=0 --type=integer
-          ./occ config:system:set memcache.local --value='\OC\Memcache\Redis'
-          ./occ config:system:set memcache.distributed --value='\OC\Memcache\Redis'
-
-      - name: Run integration
-        working-directory: build/integration
-        env:
-          LDAP_HOST: localhost
-        run: bash run.sh ${{ matrix.test-suite }} no-tail-log
-
-      - name: Print logs
-        if: always()
-        run: |
-          cat data/nextcloud.log
-          docker ps -a
-          docker ps -aq | while read container ; do IMAGE=$(docker inspect --format='{{.Config.Image}}' $container); echo $IMAGE; docker logs $container; echo "\n\n" ; done
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, integration-sqlite]
-
-    if: always()
-
-    name: integration-sqlite-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.integration-sqlite.result != 'success' }}; then exit 1; fi

.github/workflows/lint-eslint-when-unrelated.yml

@@ -0,0 +1,39 @@
+# This workflow is provided via the organization template repository
+#
+# https://github.com/nextcloud/.github
+# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
+#
+# Use lint-eslint together with lint-eslint-when-unrelated to make eslint a required check for GitHub actions
+# https://docs.github.com/en/repositories/configuring-branches-and-merges-in-your-repository/defining-the-mergeability-of-pull-requests/troubleshooting-required-status-checks#handling-skipped-but-required-checks
+
+name: Lint eslint
+
+on:
+  pull_request:
+    paths-ignore:
+      - '.github/workflows/**'
+      - 'src/**'
+      - 'appinfo/info.xml'
+      - 'package.json'
+      - 'package-lock.json'
+      - 'tsconfig.json'
+      - '.eslintrc.*'
+      - '.eslintignore'
+      - '**.js'
+      - '**.ts'
+      - '**.vue'
+
+permissions:
+  contents: read
+
+jobs:
+  lint:
+    permissions:
+      contents: none
+
+    runs-on: ubuntu-latest
+
+    name: eslint
+
+    steps:
+      - run: 'echo "No eslint required"'

.github/workflows/lint-eslint.yml

@@ -3,12 +3,17 @@
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
 #
-# SPDX-FileCopyrightText: 2021-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
+# Use lint-eslint together with lint-eslint-when-unrelated to make eslint a required check for GitHub actions
+# https://docs.github.com/en/repositories/configuring-branches-and-merges-in-your-repository/defining-the-mergeability-of-pull-requests/troubleshooting-required-status-checks#handling-skipped-but-required-checks
 
 name: Lint eslint
 
-on: pull_request
+on:
+  pull_request:
+  push:
+    branches:
+      - master
+      - stable*
 
 permissions:
   contents: read
@@ -18,78 +23,32 @@ concurrency:
   cancel-in-progress: true
 
 jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '**/src/**'
-              - '**/appinfo/info.xml'
-              - 'package.json'
-              - 'package-lock.json'
-              - 'tsconfig.json'
-              - '.eslintrc.*'
-              - '.eslintignore'
-              - '**.js'
-              - '**.ts'
-              - '**.vue'
-
   lint:
     runs-on: ubuntu-latest
 
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    name: NPM lint
+    name: eslint
 
     steps:
       - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@8e5e7e5ab8b370d6c329ec480221332ada57f0ab # v3.5.2
 
       - name: Read package.json node and npm engines version
-        uses: skjnldsv/read-package-engines-version-actions@06d6baf7d8f41934ab630e97d9e6c0bc9c9ac5e4 # v3
+        uses: skjnldsv/read-package-engines-version-actions@0ce2ed60f6df073a62a77c0a4958dd0fc68e32e7 # v2.1
         id: versions
         with:
-          fallbackNode: '^20'
-          fallbackNpm: '^10'
+          fallbackNode: '^12'
+          fallbackNpm: '^6'
 
       - name: Set up node ${{ steps.versions.outputs.nodeVersion }}
-        uses: actions/setup-node@39370e3970a6d050c480ffad4ff0ed4d3fdee5af # v3
+        uses: actions/setup-node@64ed1c7eab4cce3362f8c340dee64e5eaeef8f7c # v3
         with:
           node-version: ${{ steps.versions.outputs.nodeVersion }}
 
       - name: Set up npm ${{ steps.versions.outputs.npmVersion }}
-        run: npm i -g 'npm@${{ steps.versions.outputs.npmVersion }}'
+        run: npm i -g npm@"${{ steps.versions.outputs.npmVersion }}"
 
       - name: Install dependencies
-        env:
-          CYPRESS_INSTALL_BINARY: 0
-          PUPPETEER_SKIP_DOWNLOAD: true
         run: npm ci
 
       - name: Lint
         run: npm run lint
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, lint]
-
-    if: always()
-
-    # This is the summary, we just avoid to rename it so that branch protection rules still match
-    name: eslint
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.lint.result != 'success' }}; then exit 1; fi

.github/workflows/lint-php-cs.yml

@@ -2,9 +2,6 @@
 #
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2021-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 
 name: Lint php-cs
 
@@ -18,43 +15,19 @@ concurrency:
   cancel-in-progress: true
 
 jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/lib/**'
-              - '**/tests/**'
-              - '**/vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
   lint:
     runs-on: ubuntu-latest
 
-    name: PHP CS fixer lint
+    name: php-cs
 
     steps:
       - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@8e5e7e5ab8b370d6c329ec480221332ada57f0ab # v3.5.2
 
-      - name: Set up php8.1
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
+      - name: Set up php
+        uses: shivammathur/setup-php@c5fc0d8281aba02c7fda07d3a70cc5371548067d # v2
         with:
-          php-version: 8.1
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
+          php-version: 8.0
           coverage: none
           ini-file: development
         env:
@@ -65,18 +38,3 @@ jobs:
 
       - name: Lint
         run: composer run cs:check || ( echo 'Please run `composer run cs:fix` to format your code' && exit 1 )
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, lint]
-
-    if: always()
-
-    # This is the summary, we just avoid to rename it so that branch protection rules still match
-    name: php-cs
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.lint.result != 'success' }}; then exit 1; fi

.github/workflows/lint-php.yml

@@ -2,13 +2,16 @@
 #
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2021-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 
 name: Lint php
 
-on: pull_request
+on:
+  pull_request:
+  push:
+    branches:
+      - main
+      - master
+      - stable*
 
 permissions:
   contents: read
@@ -18,45 +21,20 @@ concurrency:
   cancel-in-progress: true
 
 jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/lib/**'
-              - '**/tests/**'
-              - '**/vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  lint:
+  php-lint:
     runs-on: ubuntu-latest
-
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
     strategy:
       matrix:
-        php-versions: [ '8.1', '8.2', '8.3', '8.4' ]
+        php-versions: [ "8.0", "8.1", "8.2" ]
 
     name: php-lint
 
     steps:
       - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@8e5e7e5ab8b370d6c329ec480221332ada57f0ab # v3.5.2
 
       - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
+        uses: shivammathur/setup-php@c5fc0d8281aba02c7fda07d3a70cc5371548067d # v2
         with:
           php-version: ${{ matrix.php-versions }}
           coverage: none
@@ -70,8 +48,8 @@ jobs:
   summary:
     permissions:
       contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, lint]
+    runs-on: ubuntu-latest
+    needs: php-lint
 
     if: always()
 
@@ -79,4 +57,4 @@ jobs:
 
     steps:
       - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.lint.result != 'success' }}; then exit 1; fi
+        run: if ${{ needs.php-lint.result != 'success' && needs.php-lint.result != 'skipped' }}; then exit 1; fi

.github/workflows/lint-stylelint.yml

@@ -1,51 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2021-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: Lint stylelint
-
-on: pull_request
-
-permissions:
-  contents: read
-
-concurrency:
-  group: lint-stylelint-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  lint:
-    runs-on: ubuntu-latest
-
-    name: stylelint
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-
-      - name: Read package.json node and npm engines version
-        uses: skjnldsv/read-package-engines-version-actions@06d6baf7d8f41934ab630e97d9e6c0bc9c9ac5e4 # v3
-        id: versions
-        with:
-          fallbackNode: '^20'
-          fallbackNpm: '^10'
-
-      - name: Set up node ${{ steps.versions.outputs.nodeVersion }}
-        uses: actions/setup-node@39370e3970a6d050c480ffad4ff0ed4d3fdee5af # v4.1.0
-        with:
-          node-version: ${{ steps.versions.outputs.nodeVersion }}
-
-      - name: Set up npm ${{ steps.versions.outputs.npmVersion }}
-        run: npm i -g 'npm@${{ steps.versions.outputs.npmVersion }}'
-
-      - name: Install dependencies
-        env:
-          CYPRESS_INSTALL_BINARY: 0
-        run: npm ci
-
-      - name: Lint
-        run: npm run stylelint

.github/workflows/node-test.yml

@@ -1,173 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2023-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: Node tests
-
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-permissions:
-  contents: read
-
-concurrency:
-  group: node-tests-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '**/__tests__/**'
-              - '**/__mocks__/**'
-              - 'apps/*/src/**'
-              - 'apps/*/appinfo/info.xml'
-              - 'core/src/**'
-              - 'package.json'
-              - 'package-lock.json'
-              - 'tsconfig.json'
-              - '**.js'
-              - '**.ts'
-              - '**.vue'
-
-  versions:
-    runs-on: ubuntu-latest-low
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    outputs:
-      nodeVersion: ${{ steps.versions.outputs.nodeVersion }}
-      npmVersion: ${{ steps.versions.outputs.npmVersion }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-
-      - name: Read package.json node and npm engines version
-        uses: skjnldsv/read-package-engines-version-actions@06d6baf7d8f41934ab630e97d9e6c0bc9c9ac5e4 # v3
-        id: versions
-        with:
-          fallbackNode: '^20'
-          fallbackNpm: '^10'
-
-  test:
-    runs-on: ubuntu-latest
-    needs: [versions, changes]
-
-    if: ${{ needs.versions.result != 'failure' && needs.changes.outputs.src != 'false' }}
-
-    env:
-      CYPRESS_INSTALL_BINARY: 0
-      PUPPETEER_SKIP_DOWNLOAD: true
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-
-      - name: Set up node ${{ needs.versions.outputs.nodeVersion }}
-        uses: actions/setup-node@39370e3970a6d050c480ffad4ff0ed4d3fdee5af # v4.1.0
-        with:
-          node-version: ${{ needs.versions.outputs.nodeVersion }}
-
-      - name: Set up npm ${{ needs.versions.outputs.npmVersion }}
-        run: npm i -g 'npm@${{ needs.versions.outputs.npmVersion }}'
-
-      - name: Install dependencies & build
-        run: |
-          npm ci
-          npm run build --if-present
-
-      - name: Test and process coverage
-        run: npm run test:coverage --if-present
-
-      - name: Collect coverage
-        uses: codecov/codecov-action@13ce06bfc6bbe3ecf90edbbf1bc32fe5978ca1d3 # v4.3.1
-        with:
-          files: ./coverage/lcov.info
-
-  jsunit:
-    runs-on: ubuntu-latest
-    needs: [versions, changes]
-
-    if: ${{ needs.versions.result != 'failure' && needs.changes.outputs.src != 'false' }}
-
-    env:
-      CYPRESS_INSTALL_BINARY: 0
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-
-      - name: Set up node ${{ needs.versions.outputs.nodeVersion }}
-        uses: actions/setup-node@39370e3970a6d050c480ffad4ff0ed4d3fdee5af # v4.1.0
-        with:
-          node-version: ${{ needs.versions.outputs.nodeVersion }}
-
-      - name: Set up npm ${{ needs.versions.outputs.npmVersion }}
-        run: npm i -g 'npm@${{ needs.versions.outputs.npmVersion }}'
-
-      - name: Install dependencies
-        run: npm ci
-
-      - name: Test
-        run: npm run test:jsunit
-
-  handlebars:
-    runs-on: ubuntu-latest
-    needs: [versions, changes]
-
-    if: ${{ needs.versions.result != 'failure' && needs.changes.outputs.src != 'false' }}
-
-    env:
-      CYPRESS_INSTALL_BINARY: 0
-      PUPPETEER_SKIP_DOWNLOAD: true
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-
-      - name: Set up node ${{ needs.versions.outputs.nodeVersion }}
-        uses: actions/setup-node@39370e3970a6d050c480ffad4ff0ed4d3fdee5af # v4.1.0
-        with:
-          node-version: ${{ needs.versions.outputs.nodeVersion }}
-
-      - name: Set up npm ${{ needs.versions.outputs.npmVersion }}
-        run: npm i -g 'npm@${{ needs.versions.outputs.npmVersion }}'
-
-      - name: Install dependencies
-        run: npm ci
-
-      - name: Run compile
-        run: ./build/compile-handlebars-templates.sh
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, test, jsunit, handlebars]
-
-    if: always()
-
-    name: node-test-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && (needs.test.result != 'success' || needs.jsunit.result != 'success' || needs.handlebars.result != 'success') }}; then exit 1; fi

.github/workflows/node-tests.yml

@@ -0,0 +1,95 @@
+name: Node
+
+on:
+  pull_request:
+  push:
+    branches:
+      - master
+      - stable*
+
+jobs:
+  versions:
+    runs-on: ubuntu-latest
+
+    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
+
+    outputs:
+      nodeVersion: ${{ steps.versions.outputs.nodeVersion }}
+      npmVersion: ${{ steps.versions.outputs.npmVersion }}
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Read package.json node and npm engines version
+        uses: skjnldsv/read-package-engines-version-actions@v1.1
+        id: versions
+        with:
+          fallbackNode: '^12'
+          fallbackNpm: '^6'
+
+  test:
+    runs-on: ubuntu-latest
+    needs: versions
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Set up node ${{ needs.versions.outputs.nodeVersion }}
+        uses: actions/setup-node@v2
+        with:
+          node-version: ${{ needs.versions.outputs.nodeVersion }}
+
+      - name: Set up npm ${{ needs.versions.outputs.npmVersion }}
+        run: npm i -g npm@"${{ needs.versions.outputs.npmVersion }}"
+
+      - name: Install dependencies
+        run: npm ci
+
+      - name: Test
+        run: npm run test
+
+  jsunit:
+    runs-on: ubuntu-latest
+    needs: versions
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Set up node ${{ needs.versions.outputs.nodeVersion }}
+        uses: actions/setup-node@v2
+        with:
+          node-version: ${{ needs.versions.outputs.nodeVersion }}
+
+      - name: Set up npm ${{ needs.versions.outputs.npmVersion }}
+        run: npm i -g npm@"${{ needs.versions.outputs.npmVersion }}"
+
+      - name: Install dependencies
+        run: npm ci
+
+      - name: Test
+        run: ./autotest-js.sh
+
+  handlebars:
+    runs-on: ubuntu-latest
+    needs: versions
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Set up node ${{ needs.versions.outputs.nodeVersion }}
+        uses: actions/setup-node@v2
+        with:
+          node-version: ${{ needs.versions.outputs.nodeVersion }}
+
+      - name: Set up npm ${{ needs.versions.outputs.npmVersion }}
+        run: npm i -g npm@"${{ needs.versions.outputs.npmVersion }}"
+
+      - name: Install dependencies
+        run: npm ci
+
+      - name: Run compile
+        run: ./build/compile-handlebars-templates.sh

.github/workflows/node.yml

@@ -2,13 +2,26 @@
 #
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2021-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 
 name: Node
 
-on: pull_request
+on:
+  pull_request:
+    paths:
+      - '.github/workflows/**'
+      - 'src/**'
+      - 'apps/**/appinfo/info.xml'
+      - 'package.json'
+      - 'package-lock.json'
+      - 'tsconfig.json'
+      - '**.js'
+      - '**.ts'
+      - '**.vue'
+  push:
+    branches:
+      - main
+      - master
+      - stable*
 
 permissions:
   contents: read
@@ -18,62 +31,30 @@ concurrency:
   cancel-in-progress: true
 
 jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '**/src/**'
-              - '**/appinfo/info.xml'
-              - 'package.json'
-              - 'package-lock.json'
-              - 'tsconfig.json'
-              - '**.js'
-              - '**.ts'
-              - '**.vue'
-              - 'core/css/*'
-              - 'core/img/**'
-              - 'version.php'
-
   build:
     runs-on: ubuntu-latest
 
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    name: NPM build
+    name: node
     steps:
       - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+        uses: actions/checkout@8e5e7e5ab8b370d6c329ec480221332ada57f0ab # v3.5.2
 
       - name: Read package.json node and npm engines version
-        uses: skjnldsv/read-package-engines-version-actions@06d6baf7d8f41934ab630e97d9e6c0bc9c9ac5e4 # v3
+        uses: skjnldsv/read-package-engines-version-actions@0ce2ed60f6df073a62a77c0a4958dd0fc68e32e7 # v2.1
         id: versions
         with:
-          fallbackNode: '^20'
-          fallbackNpm: '^10'
+          fallbackNode: '^12'
+          fallbackNpm: '^6'
 
       - name: Set up node ${{ steps.versions.outputs.nodeVersion }}
-        uses: actions/setup-node@39370e3970a6d050c480ffad4ff0ed4d3fdee5af # v3
+        uses: actions/setup-node@64ed1c7eab4cce3362f8c340dee64e5eaeef8f7c # v3
         with:
           node-version: ${{ steps.versions.outputs.nodeVersion }}
 
       - name: Set up npm ${{ steps.versions.outputs.npmVersion }}
-        run: npm i -g 'npm@${{ steps.versions.outputs.npmVersion }}'
+        run: npm i -g npm@"${{ steps.versions.outputs.npmVersion }}"
 
       - name: Install dependencies & build
-        env:
-          CYPRESS_INSTALL_BINARY: 0
-          PUPPETEER_SKIP_DOWNLOAD: true
         run: |
           npm ci
           npm run build --if-present
@@ -88,18 +69,3 @@ jobs:
           git status
           git --no-pager diff
           exit 1 # make it red to grab attention
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, build]
-
-    if: always()
-
-    # This is the summary, we just avoid to rename it so that branch protection rules still match
-    name: node
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.build.result != 'success' }}; then exit 1; fi

.github/workflows/npm-audit-fix.yml

@@ -1,75 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2023-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: Npm audit fix and compile
-
-on:
-  workflow_dispatch:
-  schedule:
-    # At 2:30 on Sundays
-    - cron: '30 2 * * 0'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-
-    strategy:
-      fail-fast: false
-      matrix:
-        branches: ['main', 'master', 'stable31', 'stable30', 'stable29']
-
-    name: npm-audit-fix-${{ matrix.branches }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-        with:
-          ref: ${{ matrix.branches }}
-
-      - name: Read package.json node and npm engines version
-        uses: skjnldsv/read-package-engines-version-actions@06d6baf7d8f41934ab630e97d9e6c0bc9c9ac5e4 # v3
-        id: versions
-        with:
-          fallbackNode: '^20'
-          fallbackNpm: '^10'
-
-      - name: Set up node ${{ steps.versions.outputs.nodeVersion }}
-        uses: actions/setup-node@39370e3970a6d050c480ffad4ff0ed4d3fdee5af # v3
-        with:
-          node-version: ${{ steps.versions.outputs.nodeVersion }}
-
-      - name: Set up npm ${{ steps.versions.outputs.npmVersion }}
-        run: npm i -g 'npm@${{ steps.versions.outputs.npmVersion }}'
-
-      - name: Fix npm audit
-        id: npm-audit
-        uses: nextcloud-libraries/npm-audit-action@2a60bd2e79cc77f2cc4d9a3fe40f1a69896f3a87 # v0.1.0
-
-      - name: Run npm ci and npm run build
-        if: always()
-        env:
-          CYPRESS_INSTALL_BINARY: 0
-        run: |
-          npm ci
-          npm run build --if-present
-
-      - name: Create Pull Request
-        if: always()
-        uses: peter-evans/create-pull-request@67ccf781d68cd99b580ae25a5c18a1cc84ffff1f # v7.0.6
-        with:
-          token: ${{ secrets.COMMAND_BOT_PAT }}
-          commit-message: 'fix(deps): Fix npm audit'
-          committer: GitHub <noreply@github.com>
-          author: nextcloud-command <nextcloud-command@users.noreply.github.com>
-          signoff: true
-          branch: automated/noid/${{ matrix.branches }}-fix-npm-audit
-          title: '[${{ matrix.branches }}] Fix npm audit'
-          body: ${{ steps.npm-audit.outputs.markdown }}
-          labels: |
-            dependencies
-            3. to review

.github/workflows/object-storage-azure.yml

@@ -1,127 +0,0 @@
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: Object storage azure
-on:
-  pull_request:
-  schedule:
-    - cron: "15 2 * * *"
-
-concurrency:
-  group: object-storage-azure-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  azure-primary-tests:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      matrix:
-        php-versions: ['8.1', '8.2']
-        include:
-          - php-versions: '8.3'
-            coverage: true
-
-    name: php${{ matrix.php-versions }}-azure
-
-    services:
-      azurite:
-        image: mcr.microsoft.com/azure-storage/azurite
-        env:
-          AZURITE_ACCOUNTS: nextcloud:bmV4dGNsb3Vk
-        ports:
-          - 10000:10000
-        options: --health-cmd="nc 127.0.0.1 10000 -z" --health-interval=1s --health-retries=30
-
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up Nextcloud
-        env:
-          OBJECT_STORE: azure
-          OBJECT_STORE_KEY: nextcloud
-          OBJECT_STORE_SECRET: bmV4dGNsb3Vk
-        run: |
-          composer install
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: PHPUnit
-        env:
-          OBJECT_STORE: azure
-          OBJECT_STORE_KEY: nextcloud
-          OBJECT_STORE_SECRET: bmV4dGNsb3Vk
-        run: composer run test -- --group PRIMARY-azure ${{ matrix.coverage && ' --coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-azure
-
-      - name: Azurite logs
-        if: always()
-        run: |
-          docker ps -a
-          docker ps -aq | while read container ; do IMAGE=$(docker inspect --format='{{.Config.Image}}' $container); echo $IMAGE; docker logs $container; echo "\n\n" ; done
-
-  azure-primary-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes, azure-primary-tests]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.azure-primary-tests.result != 'success' }}; then exit 1; fi

.github/workflows/object-storage-s3.yml

@@ -1,133 +0,0 @@
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: Object storage S3
-on:
-  pull_request:
-  schedule:
-    - cron: "15 2 * * *"
-
-concurrency:
-  group: object-storage-s3-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  s3-primary-tests-minio:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      matrix:
-        php-versions: ['8.1', '8.2']
-        include:
-          - php-versions: '8.3'
-            coverage: true
-
-    name: php${{ matrix.php-versions }}-s3
-
-    services:
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-      minio:
-        image: bitnami/minio
-        env:
-          MINIO_ROOT_USER: nextcloud
-          MINIO_ROOT_PASSWORD: bWluaW8tc2VjcmV0LWtleS1uZXh0Y2xvdWQ=
-          MINIO_DEFAULT_BUCKETS: nextcloud
-        ports:
-          - "9000:9000"
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up Nextcloud
-        env:
-          OBJECT_STORE: s3
-          OBJECT_STORE_KEY: nextcloud
-          OBJECT_STORE_SECRET: bWluaW8tc2VjcmV0LWtleS1uZXh0Y2xvdWQ=
-        run: |
-          composer install
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: Wait for S3
-        run: |
-          sleep 10
-          curl -f -m 1 --retry-connrefused --retry 10 --retry-delay 10 http://localhost:9000/minio/health/ready
-
-      - name: PHPUnit
-        env:
-          OBJECT_STORE: s3
-          OBJECT_STORE_KEY: nextcloud
-          OBJECT_STORE_SECRET: bWluaW8tc2VjcmV0LWtleS1uZXh0Y2xvdWQ=
-        run: composer run test -- --group PRIMARY-s3 ${{ matrix.coverage && ' --coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-s3
-
-      - name: S3 logs
-        if: always()
-        run: |
-          docker ps -a
-          docker ps -aq | while read container ; do IMAGE=$(docker inspect --format='{{.Config.Image}}' $container); echo $IMAGE; docker logs $container; echo "\n\n" ; done
-
-  s3-primary-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes,s3-primary-tests-minio]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.s3-primary-tests-minio.result != 'success' }}; then exit 1; fi

.github/workflows/object-storage-swift.yml

@@ -1,123 +0,0 @@
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: Object storage Swift
-on:
-  pull_request:
-  schedule:
-    - cron: "15 2 * * *"
-
-concurrency:
-  group: object-storage-swift-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  swift-primary-tests:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      matrix:
-        php-versions: ['8.1', '8.2']
-        include:
-          - php-versions: '8.3'
-            coverage: true
-
-    name: php${{ matrix.php-versions }}-swift
-
-    services:
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-      swift:
-        image: ghcr.io/cscfi/docker-keystone-swift
-        ports:
-          - 5000:5000
-          - 8080:8080
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up Nextcloud
-        env:
-          OBJECT_STORE: swift
-          OBJECT_STORE_SECRET: veryfast
-        run: |
-          composer install
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: PHPUnit
-        env:
-          OBJECT_STORE: swift
-          OBJECT_STORE_SECRET: veryfast
-        run: composer run test -- --group PRIMARY-swift ${{ matrix.coverage && ' --coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-swift
-
-      - name: Swift logs
-        if: always()
-        run: |
-          docker ps -a
-          docker ps -aq | while read container ; do IMAGE=$(docker inspect --format='{{.Config.Image}}' $container); echo $IMAGE; docker logs $container; echo "\n\n" ; done
-
-  swift-primary-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes,swift-primary-tests]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.swift-primary-tests.result != 'success' }}; then exit 1; fi

.github/workflows/oci.yml

@@ -0,0 +1,86 @@
+name: PHPUnit
+
+on: pull_request
+
+permissions:
+  contents: read
+
+concurrency:
+  group: phpunit-oci-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+jobs:
+  phpunit-oci:
+    runs-on: ubuntu-20.04
+
+    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
+
+    strategy:
+      matrix:
+        php-versions: ['8.0', '8.1', '8.2']
+
+    services:
+      oracle:
+        image: ghcr.io/gvenzl/oracle-xe:11
+
+        # Provide passwords and other environment variables to container
+        env:
+          ORACLE_RANDOM_PASSWORD: true
+          APP_USER: autotest
+          APP_USER_PASSWORD: owncloud
+
+        # Forward Oracle port
+        ports:
+          - 1521:1521/tcp
+
+        # Provide healthcheck script options for startup
+        options: >-
+          --health-cmd healthcheck.sh
+          --health-interval 10s
+          --health-timeout 5s
+          --health-retries 10
+
+    steps:
+      - name: Checkout server
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+
+      - name: Set up php ${{ matrix.php-versions }}
+        uses: shivammathur/setup-php@v2
+        with:
+          php-version: ${{ matrix.php-versions }}
+          extensions: ctype, curl, dom, fileinfo, gd, imagick, intl, json, mbstring, oci8, openssl, pcntl, pdo_sqlite, posix, sqlite, xml, zip
+          tools: phpunit:9
+          coverage: none
+          ini-file: development
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Set up Nextcloud
+        run: |
+          mkdir data
+          ./occ maintenance:install --verbose --database=oci --database-name=XE --database-host=127.0.0.1 --database-port=1521 --database-user=autotest --database-pass=owncloud --admin-user admin --admin-pass admin
+          php -f index.php
+
+      - name: PHPUnit
+        working-directory: tests
+        run: phpunit --configuration phpunit-autotest.xml --group DB,SLOWDB
+
+      - name: Run repair steps
+        run: |
+          ./occ maintenance:repair --include-expensive
+
+  summary:
+    permissions:
+      contents: none
+    runs-on: ubuntu-latest
+    needs: phpunit-oci
+
+    if: always()
+
+    name: phpunit-oci-summary
+
+    steps:
+      - name: Summary status
+        run: if ${{ needs.phpunit-oci.result != 'success' }}; then exit 1; fi

.github/workflows/openapi.yml

@@ -1,45 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-FileCopyrightText: 2024 Arthur Schiwon <blizzz@arthur-schiwon.de>
-# SPDX-License-Identifier: MIT
-
-name: OpenAPI
-
-on: pull_request
-
-permissions:
-  contents: read
-
-concurrency:
-  group: openapi-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  openapi:
-    runs-on: ubuntu-latest
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-
-      - name: Set up php
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: '8.1'
-          extensions: ctype, curl, dom, fileinfo, gd, json, libxml, mbstring, openssl, pcntl, pdo, posix, session, simplexml, xml, xmlreader, xmlwriter, zip, zlib
-          coverage: none
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up dependencies
-        run: composer i
-
-      - name: OpenAPI checker
-        run: build/openapi-checker.sh

.github/workflows/performance.yml

@@ -1,13 +1,7 @@
-# SPDX-FileCopyrightText: 2022 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 name: Performance testing
 on:
   pull_request:
 
-concurrency:
-  group: performance-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
 jobs:
   performance-testing:
     runs-on: ubuntu-latest
@@ -17,28 +11,23 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        php-versions: ['8.1']
+        php-versions: ['8.0']
 
     name: performance-${{ matrix.php-versions }}
 
     steps:
-      - name: Disabled on forks
-        if: ${{ github.event.pull_request.head.repo.full_name != github.repository }}
-        run: |
-          echo 'Can not run performance tests on forks'
-          exit 1
-
       - name: Checkout server before PR
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
+        uses: actions/checkout@v3
         with:
           submodules: true
           ref: ${{ github.event.pull_request.base.ref }}
 
       - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
+        uses: shivammathur/setup-php@v2
         with:
           php-version: ${{ matrix.php-versions }}
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
+          tools: phpunit:9
+          extensions: mbstring, fileinfo, intl, sqlite, pdo_sqlite, zip, gd
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
@@ -53,9 +42,8 @@ jobs:
         with:
           blueprint: tests/blueprints/basic.toml
           ref: ${{ github.event.pull_request.head.ref }}
-
       - name: Run before measurements
-        uses: nextcloud/profiler@6801ee10fc80f10b444388fb6ca9b36ad8a2ea83
+        uses: nextcloud/profiler@1e66a9de5f76a01e9d1db4f0153bcc1cbf989b3d
         with:
           run: |
             curl -s -X PROPFIND -u test:test http://localhost:8080/remote.php/dav/files/test
@@ -64,20 +52,20 @@ jobs:
             curl -s -u test:test -T README.md http://localhost:8080/remote.php/dav/files/test/new_file.txt
             curl -s -u test:test -X DELETE http://localhost:8080/remote.php/dav/files/test/new_file.txt
           output: before.json
-          profiler-branch: master
+          profiler-branch: stable26
 
       - name: Apply PR
         run: |
-          git remote add pr '${{ github.event.pull_request.head.repo.clone_url }}'
-          git fetch pr '${{ github.event.pull_request.head.ref }}'
-          git checkout -b 'pr/${{ github.event.pull_request.head.ref }}'
+          git remote add pr ${{ github.event.pull_request.head.repo.clone_url }}
+          git fetch pr ${{ github.event.pull_request.head.ref }}
+          git checkout -b pr/${{ github.event.pull_request.head.ref }}
           git submodule update
 
           ./occ upgrade
 
       - name: Run after measurements
         id: compare
-        uses: nextcloud/profiler@6801ee10fc80f10b444388fb6ca9b36ad8a2ea83
+        uses: nextcloud/profiler@1e66a9de5f76a01e9d1db4f0153bcc1cbf989b3d
         with:
           run: |
             curl -s -X PROPFIND -u test:test http://localhost:8080/remote.php/dav/files/test
@@ -91,14 +79,14 @@ jobs:
 
       - name: Upload profiles
         if: always()
-        uses: actions/upload-artifact@65c4c4a1ddee5b72f698fdd19549f0f0fb45cf08
+        uses: actions/upload-artifact@v2
         with:
           name: profiles
           path: |
             before.json
             after.json
 
-      - uses: actions/github-script@v7
+      - uses: actions/github-script@v5
         if: failure() && steps.compare.outcome == 'failure'
         with:
           github-token: ${{secrets.GITHUB_TOKEN}}

.github/workflows/phpunit-32bits.yml

@@ -1,12 +1,6 @@
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: PHPUnit 32bits
+name: PHPUnit
 
 on:
-  pull_request:
-    paths:
-      - 'version.php'
-      - '.github/workflows/phpunit-32bits.yml'
   workflow_dispatch:
   schedule:
     - cron: "15 1 * * 1-6"
@@ -28,11 +22,11 @@ jobs:
 
     strategy:
       matrix:
-        php-versions: ['8.1','8.3']
+        php-versions: ['8.0']
 
     steps:
       - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
+        uses: actions/checkout@v3
         with:
           submodules: true
 
@@ -42,14 +36,15 @@ jobs:
           sudo apt-get install -y ffmpeg imagemagick libmagickcore-6.q16-3-extra
 
       - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
+        uses: shivammathur/setup-php@9c77701ae57b0c47f6732beebfbdec76e4e5c90a #debian bookworm fix
         with:
           php-version: ${{ matrix.php-versions }}
           extensions: ctype, curl, dom, fileinfo, gd, imagick, intl, json, mbstring, openssl, pdo_sqlite, posix, sqlite, xml, zip, apcu
+          tools: phpunit:9
           coverage: none
-          ini-file: development
           ini-values:
-            apc.enabled=on, apc.enable_cli=on, disable_functions= # https://github.com/shivammathur/setup-php/discussions/573
+            apc.enabled=on,
+            apc.enable_cli=on
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
@@ -57,10 +52,10 @@ jobs:
         env:
           DB_PORT: 4444
         run: |
-          composer install
           mkdir data
           ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-port=$DB_PORT --database-user=autotest --database-pass=rootpassword --admin-user admin --admin-pass admin
           php -f index.php
 
       - name: PHPUnit
-        run: composer run test -- --exclude-group PRIMARY-azure,PRIMARY-s3,PRIMARY-swift,Memcached,Redis,RoutingWeirdness
+        working-directory: tests
+        run: phpunit --configuration phpunit-autotest.xml --exclude-group PRIMARY-azure,PRIMARY-s3,PRIMARY-swift,Memcached,Redis,RoutingWeirdness

.github/workflows/phpunit-mariadb.yml

@@ -1,144 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2023-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: PHPUnit MariaDB
-
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-permissions:
-  contents: read
-
-concurrency:
-  group: phpunit-mariadb-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  phpunit-mariadb:
-    runs-on: ubuntu-latest
-
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    strategy:
-      matrix:
-        php-versions: ['8.1']
-        mariadb-versions: ['10.3', '10.6', '10.11', '11.4']
-        include:
-          - php-versions: '8.3'
-            mariadb-versions: '10.11'
-            coverage: ${{ github.event_name != 'pull_request' }}
-          - php-versions: '8.4'
-            mariadb-versions: '11.4'
-
-    name: MariaDB ${{ matrix.mariadb-versions }} (PHP ${{ matrix.php-versions }}) - database tests
-
-    services:
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-      mariadb:
-        image: mariadb:${{ matrix.mariadb-versions }}
-        ports:
-          - 4444:3306/tcp
-        env:
-          MYSQL_ROOT_PASSWORD: rootpassword
-          MYSQL_USER: oc_autotest
-          MYSQL_PASSWORD: nextcloud
-          MYSQL_DATABASE: oc_autotest
-        options: --health-cmd="${{ matrix.mariadb-versions <= 10.4 && 'mysqladmin' || 'mariadb-admin'}} ping" --health-interval 5s --health-timeout 2s --health-retries 5
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, mysql, pdo_mysql
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up dependencies
-        run: composer i
-
-      - name: Enable ONLY_FULL_GROUP_BY MariaDB option
-        run: |
-          echo "SET GLOBAL sql_mode=(SELECT CONCAT(@@sql_mode,',ONLY_FULL_GROUP_BY'));" | mysql -h 127.0.0.1 -P 4444 -u root -prootpassword
-          echo 'SELECT @@sql_mode;' | mysql -h 127.0.0.1 -P 4444 -u root -prootpassword
-
-      - name: Set up Nextcloud
-        env:
-          DB_PORT: 4444
-        run: |
-          mkdir data
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=mysql --database-name=nextcloud --database-host=127.0.0.1 --database-port=$DB_PORT --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: PHPUnit
-        run: composer run test:db ${{ matrix.coverage && ' -- --coverage-clover ./clover.db.xml' || '' }}
-
-      - name: Upload db code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.db.xml
-          flags: phpunit-mariadb
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, phpunit-mariadb]
-
-    if: always()
-
-    name: phpunit-mariadb-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.phpunit-mariadb.result != 'success' }}; then exit 1; fi

.github/workflows/phpunit-memcached.yml

@@ -1,126 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: PHPUnit memcached
-
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-permissions:
-  contents: read
-
-concurrency:
-  group: phpunit-memcached-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  phpunit-memcached:
-    runs-on: ubuntu-latest
-
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    strategy:
-      matrix:
-        php-versions: ['8.1', '8.3', '8.4']
-        include:
-          - php-versions: '8.2'
-            coverage: ${{ github.event_name != 'pull_request' }}
-
-    name: Memcached (PHP ${{ matrix.php-versions }})
-
-    services:
-      memcached:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 11212:11212/tcp
-          - 11212:11212/udp
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, memcached, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up dependencies
-        run: composer i
-
-      - name: Set up Nextcloud
-        run: |
-          mkdir data
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: PHPUnit memcached tests
-        run: composer run test -- --group Memcache,Memcached ${{ matrix.coverage && '--coverage-clover ./clover.xml' || '' }}
-
-      - name: Upload code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.xml
-          flags: phpunit-memcached
-
-      - name: Print logs
-        if: always()
-        run: |
-          cat data/nextcloud.log
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, phpunit-memcached]
-
-    if: always()
-
-    name: phpunit-memcached-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.phpunit-memcached.result != 'success' }}; then exit 1; fi

.github/workflows/phpunit-mysql-sharding.yml

@@ -1,184 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2022-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: PHPUnit sharding
-
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-permissions:
-  contents: read
-
-concurrency:
-  group: phpunit-mysql-sharding-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src }}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  phpunit-mysql:
-    runs-on: ubuntu-latest
-
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    strategy:
-      matrix:
-        php-versions: ['8.1']
-        mysql-versions: ['8.4']
-
-    name: Sharding - MySQL ${{ matrix.mysql-versions }} (PHP ${{ matrix.php-versions }}) - database tests
-
-    services:
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-      mysql:
-        image: ghcr.io/nextcloud/continuous-integration-mysql-${{ matrix.mysql-versions }}:latest
-        ports:
-          - 4444:3306/tcp
-        env:
-          MYSQL_ROOT_PASSWORD: rootpassword
-          MYSQL_USER: oc_autotest
-          MYSQL_PASSWORD: nextcloud
-          MYSQL_DATABASE: oc_autotest
-        options: --health-cmd="mysqladmin ping" --health-interval 5s --health-timeout 2s --health-retries 10
-      shard1:
-        image: ghcr.io/nextcloud/continuous-integration-mysql-${{ matrix.mysql-versions }}:latest
-        ports:
-          - 5001:3306/tcp
-        env:
-          MYSQL_ROOT_PASSWORD: rootpassword
-          MYSQL_USER: oc_autotest
-          MYSQL_PASSWORD: nextcloud
-          MYSQL_DATABASE: nextcloud
-        options: --health-cmd="mysqladmin ping" --health-interval 5s --health-timeout 2s --health-retries 10
-      shard2:
-        image: ghcr.io/nextcloud/continuous-integration-mysql-${{ matrix.mysql-versions }}:latest
-        ports:
-          - 5002:3306/tcp
-        env:
-          MYSQL_ROOT_PASSWORD: rootpassword
-          MYSQL_USER: oc_autotest
-          MYSQL_PASSWORD: nextcloud
-          MYSQL_DATABASE: nextcloud
-        options: --health-cmd="mysqladmin ping" --health-interval 5s --health-timeout 2s --health-retries 10
-      shard3:
-        image: ghcr.io/nextcloud/continuous-integration-mysql-${{ matrix.mysql-versions }}:latest
-        ports:
-          - 5003:3306/tcp
-        env:
-          MYSQL_ROOT_PASSWORD: rootpassword
-          MYSQL_USER: oc_autotest
-          MYSQL_PASSWORD: nextcloud
-          MYSQL_DATABASE: nextcloud
-        options: --health-cmd="mysqladmin ping" --health-interval 5s --health-timeout 2s --health-retries 10
-      shard4:
-        image: ghcr.io/nextcloud/continuous-integration-mysql-${{ matrix.mysql-versions }}:latest
-        ports:
-          - 5004:3306/tcp
-        env:
-          MYSQL_ROOT_PASSWORD: rootpassword
-          MYSQL_USER: oc_autotest
-          MYSQL_PASSWORD: nextcloud
-          MYSQL_DATABASE: nextcloud
-        options: --health-cmd="mysqladmin ping" --health-interval 5s --health-timeout 2s --health-retries 10
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, mysql, pdo_mysql
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up dependencies
-        run: composer i
-
-      - name: Enable ONLY_FULL_GROUP_BY MySQL option
-        run: |
-          echo "SET GLOBAL sql_mode=(SELECT CONCAT(@@sql_mode,',ONLY_FULL_GROUP_BY'));" | mysql -h 127.0.0.1 -P 4444 -u root -prootpassword
-          echo "SELECT @@sql_mode;" | mysql -h 127.0.0.1 -P 4444 -u root -prootpassword
-
-      - name: Set up Nextcloud
-        env:
-          DB_PORT: 4444
-          SHARDING: 1
-        run: |
-          mkdir data
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=mysql --database-name=nextcloud --database-host=127.0.0.1 --database-port=$DB_PORT --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: PHPUnit
-        run: composer run test:db ${{ matrix.coverage && ' -- --coverage-clover ./clover.db.xml' || '' }}
-
-      - name: Upload db code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.db.xml
-          flags: phpunit-mysql
-
-      - name: Print logs
-        if: always()
-        run: |
-          cat data/nextcloud.log
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, phpunit-mysql]
-
-    if: always()
-
-    name: phpunit-mysql-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.phpunit-mysql.result != 'success' }}; then exit 1; fi

.github/workflows/phpunit-mysql.yml

@@ -1,149 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2022-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: PHPUnit mysql
-
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-permissions:
-  contents: read
-
-concurrency:
-  group: phpunit-mysql-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src }}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  phpunit-mysql:
-    runs-on: ubuntu-latest
-
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    strategy:
-      matrix:
-        php-versions: ['8.1']
-        mysql-versions: ['8.0', '8.4']
-        include:
-          - mysql-versions: '8.0'
-            php-versions: '8.3'
-            coverage: ${{ github.event_name != 'pull_request' }}
-          - mysql-versions: '8.4'
-            php-versions: '8.4'
-
-    name: MySQL ${{ matrix.mysql-versions }} (PHP ${{ matrix.php-versions }}) - database tests
-
-    services:
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-      mysql:
-        image: ghcr.io/nextcloud/continuous-integration-mysql-${{ matrix.mysql-versions }}:latest
-        ports:
-          - 4444:3306/tcp
-        env:
-          MYSQL_ROOT_PASSWORD: rootpassword
-          MYSQL_USER: oc_autotest
-          MYSQL_PASSWORD: nextcloud
-          MYSQL_DATABASE: oc_autotest
-        options: --health-cmd="mysqladmin ping" --health-interval 5s --health-timeout 2s --health-retries 10
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, mysql, pdo_mysql
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up dependencies
-        run: composer i
-
-      - name: Enable ONLY_FULL_GROUP_BY MySQL option
-        run: |
-          echo "SET GLOBAL sql_mode=(SELECT CONCAT(@@sql_mode,',ONLY_FULL_GROUP_BY'));" | mysql -h 127.0.0.1 -P 4444 -u root -prootpassword
-          echo "SELECT @@sql_mode;" | mysql -h 127.0.0.1 -P 4444 -u root -prootpassword
-
-      - name: Set up Nextcloud
-        env:
-          DB_PORT: 4444
-        run: |
-          mkdir data
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=mysql --database-name=nextcloud --database-host=127.0.0.1 --database-port=$DB_PORT --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: PHPUnit
-        run: composer run test:db ${{ matrix.coverage && ' -- --coverage-clover ./clover.db.xml' || '' }}
-
-      - name: Upload db code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.db.xml
-          flags: phpunit-mysql
-
-      - name: Print logs
-        if: always()
-        run: |
-          cat data/nextcloud.log
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, phpunit-mysql]
-
-    if: always()
-
-    name: phpunit-mysql-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.phpunit-mysql.result != 'success' }}; then exit 1; fi

.github/workflows/phpunit-nodb.yml

@@ -1,131 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-#
-# This is the testsuite running all non-database agnostic unit tests
-
-name: PHPUnit nodb
-
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-permissions:
-  contents: read
-
-concurrency:
-  group: phpunit-nodb-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src }}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  phpunit-nodb:
-    runs-on: ubuntu-latest
-
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    strategy:
-      matrix:
-        php-versions: ['8.1', '8.3', '8.4']
-        include:
-          - php-versions: '8.2'
-            coverage: ${{ github.event_name != 'pull_request' }}
-
-    name: No DB unit tests (PHP ${{ matrix.php-versions }})
-
-    services:
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, imagick, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-          # Required for tests that use pcntl
-          ini-values: disable_functions=""
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up dependencies
-        run: composer i
-
-      - name: Set up Nextcloud
-        run: |
-          mkdir data
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: PHPUnit nodb testsuite
-        run: composer run test -- --exclude-group DB,SLOWDB ${{ matrix.coverage && ' --coverage-clover ./clover.nodb.xml' || '' }}
-
-      - name: Upload nodb code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.nodb.xml
-          flags: phpunit-nodb
-
-      - name: Print logs
-        if: always()
-        run: |
-          cat data/nextcloud.log
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, phpunit-nodb]
-
-    if: always()
-
-    name: phpunit-nodb-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.phpunit-nodb.result != 'success' }}; then exit 1; fi

.github/workflows/phpunit-object-store-primary.yml

@@ -1,121 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: PHPUnit primary object store
-on:
-  pull_request:
-  schedule:
-    - cron: "15 2 * * *"
-
-concurrency:
-  group: phpunit-object-store-primary-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src}}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  object-store-primary-tests-minio:
-    runs-on: ubuntu-latest
-    needs: changes
-
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' && needs.changes.outputs.src != 'false' }}
-
-    strategy:
-      # do not stop on another job's failure
-      fail-fast: false
-      matrix:
-        php-versions: ['8.1']
-        key: ['s3', 's3-multibucket']
-
-    name: php${{ matrix.php-versions }}-${{ matrix.key }}-minio
-
-    services:
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-      minio:
-        image: bitnami/minio
-        env:
-          MINIO_ROOT_USER: nextcloud
-          MINIO_ROOT_PASSWORD: bWluaW8tc2VjcmV0LWtleS1uZXh0Y2xvdWQ=
-          MINIO_DEFAULT_BUCKETS: nextcloud
-        ports:
-          - "9000:9000"
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up Nextcloud
-        env:
-          OBJECT_STORE: ${{ matrix.key }}
-          OBJECT_STORE_KEY: nextcloud
-          OBJECT_STORE_SECRET: bWluaW8tc2VjcmV0LWtleS1uZXh0Y2xvdWQ=
-        run: |
-          composer install
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: Wait for S3
-        run: |
-          sleep 10
-          curl -f -m 1 --retry-connrefused --retry 10 --retry-delay 10 http://localhost:9000/minio/health/ready
-
-      - name: PHPUnit
-        run: composer run test:db
-
-      - name: S3 logs
-        if: always()
-        run: |
-          cat data/nextcloud.log
-          docker ps -a
-          docker ps -aq | while read container ; do IMAGE=$(docker inspect --format='{{.Config.Image}}' $container); echo $IMAGE; docker logs $container; echo "\n\n" ; done
-
-
-  object-store-primary-summary:
-    runs-on: ubuntu-latest-low
-    needs: [changes,object-store-primary-tests-minio]
-
-    if: always()
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.object-store-primary-tests-minio.result != 'success' }}; then exit 1; fi

.github/workflows/phpunit-oci.yml

@@ -1,153 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2022-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: PHPUnit OCI
-
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-permissions:
-  contents: read
-
-concurrency:
-  group: phpunit-oci-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src }}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  phpunit-oci:
-    runs-on: ubuntu-latest
-
-    needs: changes
-    if: ${{ needs.changes.outputs.src != 'false' && github.repository_owner != 'nextcloud-gmbh' }}
-
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          - oracle-versions: '11'
-            php-versions: '8.1'
-          - oracle-versions: '18'
-            php-versions: '8.1'
-            coverage: ${{ github.event_name != 'pull_request' }}
-          - oracle-versions: '21'
-            php-versions: '8.2'
-          - oracle-versions: '23'
-            php-versions: '8.3'
-          - oracle-versions: '23'
-            php-versions: '8.4'
-
-    name: Oracle ${{ matrix.oracle-versions }} (PHP ${{ matrix.php-versions }}) - database tests
-
-    services:
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-      oracle:
-        image: ghcr.io/gvenzl/oracle-${{ matrix.oracle-versions < 23 && 'xe' || 'free'  }}:${{ matrix.oracle-versions }}
-
-        # Provide passwords and other environment variables to container
-        env:
-          ORACLE_PASSWORD: oracle
-
-        # Forward Oracle port
-        ports:
-          - 1521:1521
-
-        # Provide healthcheck script options for startup
-        options: >-
-          --health-cmd healthcheck.sh
-          --health-interval 20s
-          --health-timeout 10s
-          --health-retries 10
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, oci8
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up dependencies
-        run: composer i
-
-      - name: Set up Nextcloud
-        run: |
-          mkdir data
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=oci --database-name=${{ matrix.oracle-versions < 23 && 'XE' || 'FREE'  }} --database-host=127.0.0.1 --database-port=1521 --database-user=system --database-pass=oracle --admin-user admin --admin-pass admin
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: PHPUnit
-        run: composer run test:db ${{ matrix.coverage && ' -- --coverage-clover ./clover.db.xml' || '' }}
-
-      - name: Upload db code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.db.xml
-          flags: phpunit-oci
-
-      - name: Run repair steps
-        run: |
-          ./occ maintenance:repair --include-expensive
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, phpunit-oci]
-
-    if: always()
-
-    name: phpunit-oci-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.phpunit-oci.result != 'success' }}; then exit 1; fi

.github/workflows/phpunit-pgsql.yml

@@ -1,148 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2022-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: PHPUnit PostgreSQL
-
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-permissions:
-  contents: read
-
-concurrency:
-  group: phpunit-pgsql-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src }}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  phpunit-pgsql:
-    runs-on: ubuntu-latest
-
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    strategy:
-      matrix:
-        php-versions: ['8.1']
-        # To keep the matrix smaller we ignore PostgreSQL versions in between as we already test the minimum and the maximum
-        postgres-versions: ['13', '17']
-        include:
-          - php-versions: '8.3'
-            postgres-versions: '17'
-            coverage: ${{ github.event_name != 'pull_request' }}
-          - php-versions: '8.4'
-            postgres-versions: '17'
-
-    name: PostgreSQL ${{ matrix.postgres-versions }} (PHP ${{ matrix.php-versions }}) - database tests
-
-    services:
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-      postgres:
-        image: ghcr.io/nextcloud/continuous-integration-postgres-${{ matrix.postgres-versions }}:latest
-        ports:
-          - 4444:5432/tcp
-        env:
-          POSTGRES_USER: root
-          POSTGRES_PASSWORD: rootpassword
-          POSTGRES_DB: nextcloud
-        options: --mount type=tmpfs,destination=/var/lib/postgresql/data --health-cmd pg_isready --health-interval 5s --health-timeout 2s --health-retries 5
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, pgsql, pdo_pgsql
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up dependencies
-        run: composer i
-
-      - name: Set up Nextcloud
-        env:
-          DB_PORT: 4444
-        run: |
-          mkdir data
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=pgsql --database-name=nextcloud --database-host=127.0.0.1 --database-port=$DB_PORT --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: PHPUnit database tests
-        run: composer run test:db ${{ matrix.coverage && ' -- --coverage-clover ./clover.db.xml' || '' }}
-
-      - name: Upload db code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.db.xml
-          flags: phpunit-postgres
-
-      - name: Run repair steps
-        run: |
-          ./occ maintenance:repair --include-expensive
-
-      - name: Print logs
-        if: always()
-        run: |
-          cat data/nextcloud.log
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, phpunit-pgsql]
-
-    if: always()
-
-    name: phpunit-pgsql-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.phpunit-pgsql.result != 'success' }}; then exit 1; fi

.github/workflows/phpunit-sqlite.yml

@@ -1,130 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-#
-# SPDX-FileCopyrightText: 2022-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-
-name: PHPUnit SQLite
-
-on:
-  pull_request:
-  schedule:
-    - cron: "5 2 * * *"
-
-permissions:
-  contents: read
-
-concurrency:
-  group: phpunit-sqlite-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  changes:
-    runs-on: ubuntu-latest-low
-
-    outputs:
-      src: ${{ steps.changes.outputs.src }}
-
-    steps:
-      - uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
-        id: changes
-        continue-on-error: true
-        with:
-          filters: |
-            src:
-              - '.github/workflows/**'
-              - '3rdparty/**'
-              - '**/appinfo/**'
-              - '**/lib/**'
-              - '**/templates/**'
-              - '**/tests/**'
-              - 'vendor/**'
-              - 'vendor-bin/**'
-              - '.php-cs-fixer.dist.php'
-              - 'composer.json'
-              - 'composer.lock'
-              - '**.php'
-
-  phpunit-sqlite:
-    runs-on: ubuntu-latest
-
-    needs: changes
-    if: needs.changes.outputs.src != 'false'
-
-    strategy:
-      matrix:
-        php-versions: ['8.2', '8.3', '8.4']
-        include:
-          - php-versions: '8.1'
-            coverage: ${{ github.event_name != 'pull_request' }}
-
-    name: SQLite (PHP ${{ matrix.php-versions }})
-
-    services:
-      cache:
-        image: ghcr.io/nextcloud/continuous-integration-redis:latest
-        ports:
-          - 6379:6379/tcp
-        options: --health-cmd="redis-cli ping" --health-interval=10s --health-timeout=5s --health-retries=3
-
-    steps:
-      - name: Checkout server
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-        with:
-          submodules: true
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: ${{ matrix.php-versions }}
-          # https://docs.nextcloud.com/server/stable/admin_manual/installation/source_installation.html#prerequisites-for-manual-installation
-          extensions: bz2, ctype, curl, dom, fileinfo, gd, iconv, intl, json, libxml, mbstring, openssl, pcntl, posix, redis, session, simplexml, xmlreader, xmlwriter, zip, zlib, sqlite, pdo_sqlite
-          coverage: ${{ matrix.coverage && 'xdebug' || 'none' }}
-          ini-file: development
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Set up dependencies
-        run: composer i
-
-      - name: Set up Nextcloud
-        run: |
-          mkdir data
-          cp tests/redis.config.php config/
-          cp tests/preseed-config.php config/config.php
-          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
-          php -f tests/enable_all.php | grep -i -C9999 error && echo "Error during app setup" && exit 1 || exit 0
-
-      - name: Nextcloud debug information
-        run: ./occ app:list && echo "======= System config =======" && ./occ config:list system
-
-      - name: PHPUnit database tests
-        run: composer run test:db ${{ matrix.coverage && ' -- --coverage-clover ./clover.db.xml' || '' }}
-
-      - name: Upload db code coverage
-        if: ${{ !cancelled() && matrix.coverage }}
-        uses: codecov/codecov-action@v5.3.1
-        with:
-          files: ./clover.db.xml
-          flags: phpunit-sqlite
-
-      - name: Print logs
-        if: always()
-        run: |
-          cat data/nextcloud.log
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest-low
-    needs: [changes, phpunit-sqlite]
-
-    if: always()
-
-    name: phpunit-sqlite-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.changes.outputs.src != 'false' && needs.phpunit-sqlite.result != 'success' }}; then exit 1; fi

.github/workflows/pr-feedback.yml

@@ -1,50 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-
-# SPDX-FileCopyrightText: 2023-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-FileCopyrightText: 2023 Marcel Klehr <mklehr@gmx.net>
-# SPDX-FileCopyrightText: 2023 Joas Schilling <213943+nickvergessen@users.noreply.github.com>
-# SPDX-FileCopyrightText: 2023 Daniel Kesselberg <mail@danielkesselberg.de>
-# SPDX-FileCopyrightText: 2023 Florian Steffens <florian.steffens@nextcloud.com>
-# SPDX-License-Identifier: MIT
-
-name: 'Ask for feedback on PRs'
-on:
-  schedule:
-    - cron: '30 1 * * *'
-
-jobs:
-  pr-feedback:
-    runs-on: ubuntu-latest
-    steps:
-      - name: The get-github-handles-from-website action
-        uses: marcelklehr/get-github-handles-from-website-action@06b2239db0a48fe1484ba0bfd966a3ab81a08308 # v1.0.1
-        id: scrape
-        with:
-          website: 'https://nextcloud.com/team/'
-
-      - name: Get blocklist
-        id: blocklist
-        run: |
-          blocklist=$(curl https://raw.githubusercontent.com/nextcloud/.github/master/non-community-usernames.txt | paste -s -d, -)
-          echo "blocklist=$blocklist" >> "$GITHUB_OUTPUT"
-
-      - uses: marcelklehr/pr-feedback-action@1883b38a033fb16f576875e0cf45f98b857655c4
-        with:
-          feedback-message: |
-            Hello there,
-            Thank you so much for taking the time and effort to create a pull request to our Nextcloud project.
-
-            We hope that the review process is going smooth and is helpful for you. We want to ensure your pull request is reviewed to your satisfaction. If you have a moment, our community management team would very much appreciate your feedback on your experience with this PR review process.
-
-            Your feedback is valuable to us as we continuously strive to improve our community developer experience. Please take a moment to complete our short survey by clicking on the following link: https://cloud.nextcloud.com/apps/forms/s/i9Ago4EQRZ7TWxjfmeEpPkf6
-
-            Thank you for contributing to Nextcloud and we hope to hear from you soon!
-
-            (If you believe you should not receive this message, you can add yourself to the [blocklist](https://github.com/nextcloud/.github/blob/master/non-community-usernames.txt).)
-          days-before-feedback: 14
-          start-date: '2024-04-30'
-          exempt-authors: '${{ steps.blocklist.outputs.blocklist }},${{ steps.scrape.outputs.users }},nextcloud-command,nextcloud-android-bot'
-          exempt-bots: true

.github/workflows/reuse.yml

@@ -1,22 +0,0 @@
-# This workflow is provided via the organization template repository
-#
-# https://github.com/nextcloud/.github
-# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
-
-# SPDX-FileCopyrightText: 2022 Free Software Foundation Europe e.V. <https://fsfe.org>
-#
-# SPDX-License-Identifier: CC0-1.0
-
-name: REUSE Compliance Check
-
-on: [pull_request]
-
-jobs:
-  reuse-compliance-check:
-    runs-on: ubuntu-latest
-    steps:
-    - name: Checkout
-      uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
-
-    - name: REUSE Compliance Check
-      uses: fsfe/reuse-action@bb774aa972c2a89ff34781233d275075cbddf542 # v5.0.0

.github/workflows/s3-external.yml

@@ -0,0 +1,132 @@
+name: S3 External storage
+on:
+  push:
+    branches:
+      - master
+      - stable*
+    paths:
+      - 'apps/files_external/**'
+  pull_request:
+    paths:
+      - 'apps/files_external/**'
+
+env:
+  APP_NAME: files_external
+
+jobs:
+  s3-external-tests-minio:
+    runs-on: ubuntu-latest
+
+    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
+
+    strategy:
+      # do not stop on another job's failure
+      fail-fast: false
+      matrix:
+        php-versions: ['8.0', '8.1']
+
+    name: php${{ matrix.php-versions }}-minio
+
+    services:
+      minio:
+        env:
+          MINIO_ACCESS_KEY: minio
+          MINIO_SECRET_KEY: minio123
+        image: bitnami/minio:2021.10.6
+        ports:
+          - "9000:9000"
+
+    steps:
+      - name: Checkout server
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+
+      - name: Set up php ${{ matrix.php-versions }}
+        uses: shivammathur/setup-php@v2
+        with:
+          php-version: ${{ matrix.php-versions }}
+          tools: phpunit:9
+          extensions: mbstring, fileinfo, intl, sqlite, pdo_sqlite, zip, gd
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Set up Nextcloud
+        run: |
+          mkdir data
+          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
+          ./occ app:enable --force ${{ env.APP_NAME }}
+          php -S localhost:8080 &
+      - name: PHPUnit
+        run: |
+          echo "<?php return ['run' => true, 'secret' => 'actually-not-secret', 'passwordsalt' => 'actually-not-secret', 'hostname' => 'localhost','key' => 'minio','secret' => 'minio123', 'bucket' => 'bucket', 'port' => 9000, 'use_ssl' => false, 'autocreate' => true, 'use_path_style' => true];" > apps/${{ env.APP_NAME }}/tests/config.amazons3.php
+          phpunit --configuration tests/phpunit-autotest-external.xml apps/files_external/tests/Storage/Amazons3Test.php
+          phpunit --configuration tests/phpunit-autotest-external.xml apps/files_external/tests/Storage/VersionedAmazonS3Test.php
+      - name: S3 logs
+        if: always()
+        run: |
+          docker ps -a
+          docker logs $(docker ps -aq)
+  s3-external-tests-localstack:
+    runs-on: ubuntu-latest
+
+    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
+
+    strategy:
+      # do not stop on another job's failure
+      fail-fast: false
+      matrix:
+        php-versions: ['8.0', '8.1']
+
+    name: php${{ matrix.php-versions }}-localstack
+
+    services:
+      minio:
+        env:
+          SERVICES: s3
+          DEBUG: 1
+        image: localstack/localstack:0.12.7
+        ports:
+          - "4566:4566"
+
+    steps:
+      - name: Checkout server
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+
+      - name: Set up php ${{ matrix.php-versions }}
+        uses: shivammathur/setup-php@v2
+        with:
+          php-version: ${{ matrix.php-versions }}
+          tools: phpunit:9
+          extensions: mbstring, fileinfo, intl, sqlite, pdo_sqlite, zip, gd
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Set up Nextcloud
+        run: |
+          mkdir data
+          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
+          ./occ app:enable --force ${{ env.APP_NAME }}
+          php -S localhost:8080 &
+      - name: PHPUnit
+        run: |
+          echo "<?php return ['run' => true,'hostname' => 'localhost','key' => 'ignored','secret' => 'ignored', 'bucket' => 'bucket', 'port' => 4566, 'use_ssl' => false, 'autocreate' => true, 'use_path_style' => true];" > apps/${{ env.APP_NAME }}/tests/config.amazons3.php
+          phpunit --configuration tests/phpunit-autotest-external.xml apps/files_external/tests/Storage/Amazons3Test.php
+          phpunit --configuration tests/phpunit-autotest-external.xml apps/files_external/tests/Storage/VersionedAmazonS3Test.php
+      - name: S3 logs
+        if: always()
+        run: |
+          docker ps -a
+          docker logs $(docker ps -aq)
+
+  s3-external-summary:
+    runs-on: ubuntu-latest
+    needs: [s3-external-tests-minio, s3-external-tests-localstack]
+
+    if: always()
+
+    steps:
+      - name: Summary status
+        run: if ${{ needs.s3-external-tests-minio.result != 'success' }} || ${{ needs.s3-external-tests-localstack.result != 'success' }}; then exit 1; fi

.github/workflows/s3-primary-integration.yml

@@ -0,0 +1,84 @@
+name: S3 primary storage integration tests
+on:
+  pull_request:
+  push:
+    branches:
+      - master
+      - stable*
+
+jobs:
+  s3-primary-integration-tests-minio:
+    runs-on: ubuntu-20.04
+
+    strategy:
+      # do not stop on another job's failure
+      fail-fast: false
+      matrix:
+        php-versions: ['8.0']
+        key: ['objectstore', 'objectstore_multibucket']
+
+    name: php${{ matrix.php-versions }}-${{ matrix.key }}-minio
+
+    services:
+      redis:
+        image: redis
+        ports:
+          - "6379:6379"
+      minio:
+        env:
+          MINIO_ACCESS_KEY: minio
+          MINIO_SECRET_KEY: minio123
+        image: bitnami/minio:2021.12.29
+        ports:
+          - "9000:9000"
+
+    steps:
+      - name: Checkout server
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+
+      - name: Set up php ${{ matrix.php-versions }}
+        uses: shivammathur/setup-php@v2
+        with:
+          php-version: ${{ matrix.php-versions }}
+          tools: phpunit:9
+          extensions: mbstring, fileinfo, intl, sqlite, pdo_sqlite, zip, gd, redis
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Wait for S3
+        run: |
+          sleep 10
+          curl -f -m 1 --retry-connrefused --retry 10 --retry-delay 10 http://localhost:9000/minio/health/ready
+
+      - name: Set up Nextcloud
+        run: |
+          mkdir data
+          echo '<?php $CONFIG=["${{ matrix.key }}" => ["class" => "OC\Files\ObjectStore\S3", "arguments" => ["bucket" => "nextcloud", "autocreate" => true, "key" => "minio", "secret" => "minio123", "hostname" => "localhost", "port" => 9000, "use_ssl" => false, "use_path_style" => true, "uploadPartSize" => 52428800]]];' > config/config.php
+          echo '<?php $CONFIG=["redis" => ["host" => "localhost", "port" => 6379], "memcache.local" => "\OC\Memcache\Redis", "memcache.distributed" => "\OC\Memcache\Redis"];' > config/redis.config.php
+          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass admin
+          php -f index.php
+
+      - name: Integration
+        run: |
+          cd build/integration
+          bash run.sh --tags "~@failure-s3" features/webdav-related.feature
+
+      - name: S3 logs
+        if: always()
+        run: |
+          cat data/nextcloud.log
+          docker ps -a
+          docker ps -aq | while read container ; do IMAGE=$(docker inspect --format='{{.Config.Image}}' $container); echo $IMAGE; docker logs $container; echo "\n\n" ; done
+
+
+  s3-primary-integration-summary:
+    runs-on: ubuntu-latest
+    needs: [s3-primary-integration-tests-minio]
+
+    if: always()
+
+    steps:
+      - name: Summary status
+        run: if ${{ needs.s3-primary-integration-tests-minio.result != 'success' }}; then exit 1; fi

.github/workflows/s3-primary.yml

@@ -0,0 +1,78 @@
+name: S3 primary storage
+on:
+  pull_request:
+  push:
+    branches:
+      - master
+      - stable*
+
+jobs:
+  s3-primary-tests-minio:
+    runs-on: ubuntu-20.04
+
+    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
+
+    strategy:
+      # do not stop on another job's failure
+      fail-fast: false
+      matrix:
+        php-versions: ['8.0']
+        key: ['objectstore', 'objectstore_multibucket']
+
+    name: php${{ matrix.php-versions }}-${{ matrix.key }}-minio
+
+    services:
+      minio:
+        env:
+          MINIO_ACCESS_KEY: minio
+          MINIO_SECRET_KEY: minio123
+        image: bitnami/minio:2021.12.29
+        ports:
+          - "9000:9000"
+
+    steps:
+      - name: Checkout server
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+
+      - name: Set up php ${{ matrix.php-versions }}
+        uses: shivammathur/setup-php@v2
+        with:
+          php-version: ${{ matrix.php-versions }}
+          tools: phpunit:9
+          extensions: mbstring, fileinfo, intl, sqlite, pdo_sqlite, zip, gd
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Set up Nextcloud
+        run: |
+          mkdir data
+          echo '<?php $CONFIG=["${{ matrix.key }}" => ["class" => "OC\Files\ObjectStore\S3", "arguments" => ["bucket" => "nextcloud", "autocreate" => true, "key" => "minio", "secret" => "minio123", "hostname" => "localhost", "port" => 9000, "use_ssl" => false, "use_path_style" => true, "uploadPartSize" => 52428800]]];' > config/config.php
+          ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
+          php -f index.php
+
+      - name: Wait for S3
+        run: |
+          sleep 10
+          curl -f -m 1 --retry-connrefused --retry 10 --retry-delay 10 http://localhost:9000/minio/health/ready
+
+      - name: PHPUnit
+        working-directory: tests
+        run: phpunit --configuration phpunit-autotest.xml --group DB,SLOWDB
+      - name: S3 logs
+        if: always()
+        run: |
+          docker ps -a
+          docker logs $(docker ps -aq)
+
+
+  s3-primary-summary:
+    runs-on: ubuntu-latest
+    needs: [s3-primary-tests-minio]
+
+    if: always()
+
+    steps:
+      - name: Summary status
+        run: if ${{ needs.s3-primary-tests-minio.result != 'success' }}; then exit 1; fi

.github/workflows/smb-kerberos.yml

@@ -0,0 +1,74 @@
+name: Samba Kerberos SSO
+on:
+  push:
+    branches:
+      - master
+      - stable*
+    paths:
+      - 'apps/files_external/**'
+      - '.github/workflows/smb-kerberos.yml'
+  pull_request:
+    paths:
+      - 'apps/files_external/**'
+      - '.github/workflows/smb-kerberos.yml'
+
+jobs:
+  smb-kerberos-tests:
+    runs-on: ubuntu-latest
+
+    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
+
+    name: smb-kerberos-sso
+
+    steps:
+      - name: Checkout server
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+      - name: Pull images
+        run: |
+          docker pull icewind1991/samba-krb-test-dc
+          docker pull icewind1991/samba-krb-test-apache
+          docker pull icewind1991/samba-krb-test-client
+      - name: Setup AD-DC
+        run: |
+          cp apps/files_external/tests/*.sh .
+          mkdir data
+          sudo chown -R 33 data apps config
+          DC_IP=$(./start-dc.sh)
+          ./start-apache.sh $DC_IP $PWD
+          echo "DC_IP=$DC_IP" >> $GITHUB_ENV
+      - name: Set up Nextcloud
+        run: |
+          docker exec --user 33 apache ./occ maintenance:install --verbose --database=sqlite --database-name=nextcloud --database-host=127.0.0.1 --database-user=root --database-pass=rootpassword --admin-user admin --admin-pass password
+          docker exec --user 33 apache ./occ config:system:set trusted_domains 1 --value 'httpd.domain.test'
+
+          # setup user_saml
+          docker exec --user 33 apache ./occ app:enable user_saml --force
+          docker exec --user 33 apache ./occ config:app:set user_saml type --value 'environment-variable'
+          docker exec --user 33 apache ./occ saml:config:create
+          docker exec --user 33 apache ./occ saml:config:set 1 --general-uid_mapping=REMOTE_USER
+
+          # setup external storage
+          docker exec --user 33 apache ./occ app:enable files_external --force
+          docker exec --user 33 apache ./occ files_external:create smb smb smb::kerberosapache
+          docker exec --user 33 apache ./occ files_external:config 1 host krb.domain.test
+          docker exec --user 33 apache ./occ files_external:config 1 share netlogon
+          docker exec --user 33 apache ./occ files_external:list
+      - name: Test SSO
+        run: |
+          mkdir /tmp/shared/cookies
+          chmod 0777 /tmp/shared/cookies
+
+          echo "SAML login"
+          ./client-cmd.sh ${{ env.DC_IP }} curl -c /shared/cookies/jar -s --negotiate -u testuser@DOMAIN.TEST: --delegation always http://httpd.domain.test/index.php/apps/user_saml/saml/login
+          echo "Check we are logged in"
+          CONTENT=$(./client-cmd.sh ${{ env.DC_IP }} curl -b /shared/cookies/jar -s --negotiate -u testuser@DOMAIN.TEST: --delegation always http://httpd.domain.test/remote.php/webdav/smb/test.txt)
+          CONTENT=$(echo $CONTENT | head -n 1 | tr -d '[:space:]')
+          [[ $CONTENT == "testfile" ]]
+      - name: Show logs
+        if: failure()
+        run: |
+          docker exec --user 33 apache ./occ log:file
+          FILEPATH=$(docker exec --user 33 apache ./occ log:file | grep "Log file:" | cut -d' ' -f3)
+          docker exec --user 33 apache cat $FILEPATH

.github/workflows/stale.yml

@@ -1,5 +1,3 @@
-# SPDX-FileCopyrightText: 2019 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 name: Close stale issues
 
 on:
@@ -17,7 +15,7 @@ jobs:
       issues: write
 
     steps:
-    - uses: actions/stale@v9
+    - uses: actions/stale@v5
       with:
         repo-token: ${{ secrets.COMMAND_BOT_PAT }}
         stale-issue-message: >
@@ -27,6 +25,7 @@ jobs:
           for your contributions.
         stale-issue-label: 'stale'
         only-labels: 'needs info'
+        labels-to-remove-when-unstale: 'needs info,stale'
         exempt-issue-labels: '1. to develop,2. developing,3. to review,4. to release,security'
         days-before-stale: 30
         days-before-close: 14

.github/workflows/static-code-analysis.yml

@@ -1,39 +1,29 @@
-# SPDX-FileCopyrightText: 2020 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 name: Psalm static code analysis
 
 on:
   pull_request:
   push:
     branches:
-      - main
       - master
       - stable*
-    paths:
-      - '.github/workflows/static-code-analysis.yml'
-      - '**.php'
-
-concurrency:
-  group: static-code-analysis-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
 
 jobs:
   static-code-analysis:
     runs-on: ubuntu-latest
 
-    if: ${{ github.event_name != 'push' && github.repository_owner != 'nextcloud-gmbh' }}
+    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
 
     steps:
       - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
+        uses: actions/checkout@v3
         with:
           submodules: true
 
       - name: Set up php
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
+        uses: shivammathur/setup-php@v2
         with:
-          php-version: '8.1'
-          extensions: apcu,ctype,curl,dom,fileinfo,ftp,gd,imagick,intl,json,ldap,mbstring,openssl,pdo_sqlite,posix,sqlite,xml,zip
+          php-version: '8.0'
+          extensions: apcu,ctype,curl,dom,fileinfo,ftp,gd,intl,json,ldap,mbstring,openssl,pdo_sqlite,posix,sqlite,xml,zip
           coverage: none
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
@@ -42,62 +32,60 @@ jobs:
         run: composer i
 
       - name: Psalm
-        run: composer run psalm -- --threads=1 --monochrome --no-progress --output-format=github --update-baseline
+        run: composer run psalm:ci -- --monochrome --no-progress --output-format=github --update-baseline --report=results.sarif
 
       - name: Show potential changes in Psalm baseline
         if: always()
-        run: git diff --exit-code -- . ':!lib/composer'
+        run: git diff -- . ':!lib/composer'
+
+      - name: Upload Analysis results to GitHub
+        if: always()
+        uses: github/codeql-action/upload-sarif@v2
+        with:
+          sarif_file: results.sarif
 
   static-code-analysis-security:
     runs-on: ubuntu-latest
 
-    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
-
     steps:
       - name: Checkout code
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
+        uses: actions/checkout@v3
         with:
           submodules: true
 
       - name: Set up php
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
+        uses: shivammathur/setup-php@master
         with:
-          php-version: '8.1'
-          extensions: ctype,curl,dom,fileinfo,ftp,gd,imagick,intl,json,ldap,mbstring,openssl,pdo_sqlite,posix,sqlite,xml,zip
+          php-version: '8.0'
+          extensions: ctype,curl,dom,fileinfo,gd,intl,json,mbstring,openssl,pdo_sqlite,posix,sqlite,xml,zip
           coverage: none
 
       - name: Composer install
         run: composer i
 
       - name: Psalm taint analysis
-        run: composer run psalm:security -- --threads=1 --monochrome --no-progress --output-format=github --update-baseline --report=results.sarif
-
-      - name: Show potential changes in Psalm baseline
-        if: always()
-        run: git diff --exit-code -- . ':!lib/composer'
+        run: composer run psalm:ci -- --monochrome --no-progress --output-format=github --report=results.sarif --taint-analysis
 
       - name: Upload Security Analysis results to GitHub
         if: always()
-        uses: github/codeql-action/upload-sarif@v3
+        uses: github/codeql-action/upload-sarif@v2
         with:
           sarif_file: results.sarif
 
   static-code-analysis-ocp:
     runs-on: ubuntu-latest
 
-    if: ${{ github.event_name != 'push' && github.repository_owner != 'nextcloud-gmbh' }}
-
     steps:
       - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
+        uses: actions/checkout@v3
         with:
           submodules: true
 
       - name: Set up php
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
+        uses: shivammathur/setup-php@v2
         with:
-          php-version: '8.1'
-          extensions: ctype,curl,dom,fileinfo,gd,imagick,intl,json,mbstring,openssl,pdo_sqlite,posix,sqlite,xml,zip
+          php-version: '8.0'
+          extensions: ctype,curl,dom,fileinfo,gd,intl,json,mbstring,openssl,pdo_sqlite,posix,sqlite,xml,zip
           coverage: none
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
@@ -106,34 +94,8 @@ jobs:
         run: composer i
 
       - name: Psalm
-        run: composer run psalm:ocp -- --threads=1 --monochrome --no-progress --output-format=github --update-baseline
+        run: composer run psalm:ci -- -c psalm-ocp.xml --monochrome --no-progress --output-format=github --update-baseline
 
       - name: Show potential changes in Psalm baseline
         if: always()
-        run: git diff --exit-code -- . ':!lib/composer'
-
-  static-code-analysis-ncu:
-    runs-on: ubuntu-latest
-
-    if: ${{ github.event_name != 'push' && github.repository_owner != 'nextcloud-gmbh' }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          submodules: true
-
-      - name: Set up php
-        uses: shivammathur/setup-php@9e72090525849c5e82e596468b86eb55e9cc5401 #v2.32.0
-        with:
-          php-version: '8.1'
-          extensions: ctype,curl,dom,fileinfo,gd,imagick,intl,json,mbstring,openssl,pdo_sqlite,posix,sqlite,xml,zip
-          coverage: none
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Composer install
-        run: composer i
-
-      - name: Psalm
-        run: composer run psalm:ncu -- --threads=1 --monochrome --no-progress --output-format=github
+        run: git diff -- . ':!lib/composer'

.github/workflows/update-cacert-bundle.yml

@@ -1,11 +1,9 @@
-# SPDX-FileCopyrightText: 2022 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
 name: Update CA certificate bundle
 
 on:
   workflow_dispatch:
   schedule:
-    - cron: "5 2 * * *"
+    - cron: "5 4 * * *"
 
 jobs:
   update-ca-certificate-bundle:
@@ -14,12 +12,12 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        branches: ['master', 'stable31', 'stable30', 'stable29',  'stable28',  'stable27', 'stable26', 'stable25', 'stable24', 'stable23', 'stable22']
+        branches: ["master", "stable25", "stable24", "stable23", "stable22"]
 
     name: update-ca-certificate-bundle-${{ matrix.branches }}
 
     steps:
-      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
+      - uses: actions/checkout@v3
         with:
           ref: ${{ matrix.branches }}
           submodules: true
@@ -28,18 +26,17 @@ jobs:
         run: curl --etag-compare build/ca-bundle-etag.txt --etag-save build/ca-bundle-etag.txt --output resources/config/ca-bundle.crt https://curl.se/ca/cacert.pem
 
       - name: Create Pull Request
-        uses: peter-evans/create-pull-request@67ccf781d68cd99b580ae25a5c18a1cc84ffff1f
+        uses: peter-evans/create-pull-request@v3
         with:
           token: ${{ secrets.COMMAND_BOT_PAT }}
-          commit-message: 'fix(security): Update CA certificate bundle'
+          commit-message: Update CA certificate bundle
           committer: GitHub <noreply@github.com>
           author: nextcloud-command <nextcloud-command@users.noreply.github.com>
           signoff: true
-          branch: 'automated/noid/${{ matrix.branches }}-update-ca-cert-bundle'
-          title: '[${{ matrix.branches }}] fix(security): Update CA certificate bundle'
+          branch: automated/noid/${{ matrix.branches }}-update-ca-cert-bundle
+          title: "[${{ matrix.branches }}] Update ca-cert bundle"
           body: |
             Auto-generated update of CA certificate bundle from [https://curl.se/docs/caextract.html](https://curl.se/docs/caextract.html)
           labels: |
             dependencies
             3. to review
-          reviewers: ChristophWurst, miaulalala, nickvergessen

.github/workflows/update-code-signing-crl.yml

@@ -1,48 +0,0 @@
-# SPDX-FileCopyrightText: 2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: MIT
-name: Update code signing revocation list
-
-on:
-  workflow_dispatch:
-  schedule:
-    - cron: "5 2 * * *"
-
-jobs:
-  update-code-signing-crl:
-    runs-on: ubuntu-latest
-
-    strategy:
-      fail-fast: false
-      matrix:
-        branches: ['master', 'stable30', 'stable29',  'stable28',  'stable27', 'stable26', 'stable25', 'stable24', 'stable23', 'stable22']
-
-    name: update-code-signing-crl-${{ matrix.branches }}
-
-    steps:
-      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683
-        with:
-          ref: ${{ matrix.branches }}
-          submodules: true
-
-      - name: Download CRL file from Appstore repository
-        run: curl --output resources/codesigning/root.crl https://raw.githubusercontent.com/nextcloud/appstore/master/nextcloudappstore/certificate/nextcloud.crl
-
-      - name: Verify CRL is from CRT
-        run: openssl crl -verify -in resources/codesigning/root.crl -CAfile resources/codesigning/root.crt -noout
-
-      - name: Create Pull Request
-        uses: peter-evans/create-pull-request@67ccf781d68cd99b580ae25a5c18a1cc84ffff1f
-        with:
-          token: ${{ secrets.COMMAND_BOT_PAT }}
-          commit-message: 'fix(security): Update code signing revocation list'
-          committer: GitHub <noreply@github.com>
-          author: nextcloud-command <nextcloud-command@users.noreply.github.com>
-          signoff: true
-          branch: 'automated/noid/${{ matrix.branches }}-update-code-signing-crl'
-          title: '[${{ matrix.branches }}] fix(security): Update code signing revocation list'
-          body: |
-            Auto-generated update of code signing revocation list from [Appstore](https://github.com/nextcloud/appstore/commits/master/nextcloudappstore/certificate/nextcloud.crl)
-          labels: |
-            dependencies
-            3. to review
-          reviewers: mgallien, miaulalala, nickvergessen

.github/workflows/update-psalm-baseline.yml

@@ -0,0 +1,67 @@
+name: Update Psalm baseline
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: "5 4 * * *"
+
+jobs:
+  update-psalm-baseline:
+    runs-on: ubuntu-latest
+
+    if: ${{ github.repository_owner != 'nextcloud-gmbh' }}
+
+    strategy:
+      fail-fast: false
+      matrix:
+        branches: ["master", "stable25", "stable24", "stable23"]
+
+    name: update-psalm-baseline-${{ matrix.branches }}
+
+    steps:
+      - uses: actions/checkout@v3
+        with:
+          ref: ${{ matrix.branches }}
+          submodules: true
+
+      - name: Set up php
+        uses: shivammathur/setup-php@v2
+        with:
+          php-version: '8.0'
+          extensions: ctype,curl,dom,fileinfo,gd,intl,json,mbstring,openssl,pdo_sqlite,posix,sqlite,xml,zip
+          coverage: none
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Composer install
+        run: composer install
+
+      - name: Psalm
+        run: composer run psalm -- --monochrome --no-progress --output-format=text --update-baseline
+        continue-on-error: true
+
+      - name: Psalm OCP
+        run: composer run psalm -- -c psalm-ocp.xml --monochrome --no-progress --output-format=github --update-baseline
+        continue-on-error: true
+
+      - name: Reset composer
+        run: |
+          git clean -f lib/composer
+          git checkout composer.json composer.lock lib/composer
+
+      - name: Create Pull Request
+        uses: peter-evans/create-pull-request@v4
+        with:
+          token: ${{ secrets.COMMAND_BOT_PAT }}
+          commit-message: Update psalm baseline
+          committer: GitHub <noreply@github.com>
+          author: nextcloud-command <nextcloud-command@users.noreply.github.com>
+          signoff: true
+          branch: automated/noid/${{ matrix.branches }}-update-psalm-baseline
+          title: "[${{ matrix.branches }}] Update psalm-baseline.xml"
+          body: |
+            Auto-generated update psalm-baseline.xml with fixed psalm warnings
+          labels: |
+            automated pr
+            3. to review
+          team-reviewers: server-backend

.gitignore

@@ -1,7 +1,3 @@
-# SPDX-FileCopyrightText: 2016-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-FileCopyrightText: 2011-2016 ownCloud contributors
-# SPDX-FileCopyrightText: 2010 ownCloud contributors
-# SPDX-License-Identifier: AGPL-3.0-only
 # the default generated dir + db file
 /data
 /config/config.php
@@ -28,14 +24,12 @@
 !/apps/sharebymail
 !/apps/encryption
 !/apps/files_external
-!/apps/files_reminders
 !/apps/files_sharing
 !/apps/files_trashbin
 !/apps/files_versions
 !/apps/lookup_server_connector
 !/apps/user_ldap
 !/apps/oauth2
-!/apps/profile
 !/apps/provisioning_api
 !/apps/settings
 !/apps/systemtags
@@ -46,7 +40,6 @@
 !/apps/twofactor_backupcodes
 !/apps/user_status
 !/apps/weather_status
-!/apps/webhook_listeners
 !/apps/workflowengine
 /apps/files_external/3rdparty/irodsphp/PHPUnitTest
 /apps/files_external/3rdparty/irodsphp/web
@@ -64,9 +57,6 @@
 !/themes/example
 !/themes/README
 
-# Love to people that develop the updater
-/updater
-
 # just sane ignores
 .*.sw[po]
 *.bak
@@ -106,7 +96,6 @@ nbproject
 
 # vscode
 .vscode
-*.code-workspace
 
 # geany
 *.geany
@@ -138,8 +127,6 @@ nbproject
 /build/bin
 /build/lib/
 /build/jsdocs/
-/build/integration/output/
-/build/integration/phpserver.log
 /npm-debug.log
 /PhantomJS_*
 
@@ -152,7 +139,6 @@ Vagrantfile
 
 # Tests - auto-generated files
 /data-autotest
-/results.sarif
 /tests/.phpunit.result.cache
 /tests/coverage*
 /tests/css
@@ -167,20 +153,17 @@ Vagrantfile
 /config/config-autotest-backup.php
 /config/autoconfig.php
 clover.xml
-/coverage
 
 # Tests - dependencies
 tests/acceptance/vendor/
 
 composer.phar
 /lib/composer/bin
-/lib/composer/bamarni
 /vendor-bin/**/vendor
 
 ./.htaccess
 core/js/mimetypelist.js
 
 # Tests - cypress
-cypress/downloads
 cypress/snapshots
 cypress/videos

.gitmodules

@@ -1,6 +1,3 @@
-# SPDX-FileCopyrightText: 2016 Nextcloud GmbH and Nextcloud contributors
-# SPDX-FileCopyrightText: 2016 ownCloud, Inc.
-# SPDX-License-Identifier: AGPL-3.0-only
 [submodule "3rdparty"]
 	path = 3rdparty
 	url = https://github.com/nextcloud/3rdparty.git

.htaccess

@@ -15,18 +15,11 @@
 
   <IfModule mod_env.c>
     # Add security and privacy related headers
+
     # Avoid doubled headers by unsetting headers in "onsuccess" table,
     # then add headers to "always" table: https://github.com/nextcloud/server/pull/19002
-
-    <If "%{REQUEST_URI} =~ m#/login$#">
-      # Only on the login page we need any Origin or Referer header set.
-      Header onsuccess unset Referrer-Policy
-      Header always set Referrer-Policy "same-origin"
-    </If>
-    <Else>
-      Header onsuccess unset Referrer-Policy
-      Header always set Referrer-Policy "no-referrer"
-    </Else>
+    Header onsuccess unset Referrer-Policy
+    Header always set Referrer-Policy "no-referrer"
 
     Header onsuccess unset X-Content-Type-Options
     Header always set X-Content-Type-Options "nosniff"
@@ -47,7 +40,7 @@
   </IfModule>
 
   # Add cache control for static resources
-  <FilesMatch "\.(css|js|mjs|svg|gif|png|jpg|webp|ico|wasm|tflite)$">
+  <FilesMatch "\.(css|js|svg|gif|png|jpg|ico|wasm|tflite)$">
     <If "%{QUERY_STRING} =~ /(^|&)v=/">
       Header set Cache-Control "max-age=15778463, immutable"
     </If>
@@ -56,12 +49,23 @@
     </Else>
   </FilesMatch>
 
-  # Let browsers cache OTF and WOFF files for a week
-  <FilesMatch "\.(otf|woff2?)$">
+  # Let browsers cache WOFF files for a week
+  <FilesMatch "\.woff2?$">
     Header set Cache-Control "max-age=604800"
   </FilesMatch>
 </IfModule>
 
+# PHP 7.x
+<IfModule mod_php7.c>
+  php_value mbstring.func_overload 0
+  php_value default_charset 'UTF-8'
+  php_value output_buffering 0
+  <IfModule mod_env.c>
+    SetEnv htaccessWorking true
+  </IfModule>
+</IfModule>
+
+# PHP 8+
 <IfModule mod_php.c>
   php_value mbstring.func_overload 0
   php_value default_charset 'UTF-8'
@@ -75,8 +79,6 @@
   AddType image/svg+xml svg svgz
   AddType application/wasm wasm
   AddEncoding gzip svgz
-  # Serve ESM javascript files (.mjs) with correct mime type
-  AddType text/javascript js mjs
 </IfModule>
 
 <IfModule mod_dir.c>
@@ -101,25 +103,5 @@
   RewriteRule ^(?:\.(?!well-known)|autotest|occ|issue|indie|db_|console).* - [R=404,L]
 </IfModule>
 
-# Clients like xDavv5 on Android, or Cyberduck, use chunked requests.
-# When FastCGI or FPM is used with apache, requests arrive to Nextcloud without any content.
-# This leads to the creation of empty files.
-# The following directive will force the problematic requests to be buffered before being forwarded to Nextcloud.
-# This way, the "Transfer-Encoding" header is removed, the "Content-Length" header is set, and the request content is proxied to Nextcloud.
-# Here are more information about the issue:
-#  - https://docs.cyberduck.io/mountainduck/issues/fastcgi/
-#  - https://docs.nextcloud.com/server/latest/admin_manual/issues/general_troubleshooting.html#troubleshooting-webdav
-<IfModule mod_setenvif.c>
-  SetEnvIfNoCase Transfer-Encoding "chunked" proxy-sendcl=1
-</IfModule>
-
-# Apache disabled the sending of the server-side content-length header
-# in their 2.4.59 patch updated which breaks some use-cases in Nextcloud.
-# Setting ap_trust_cgilike_cl allows to bring back the usual behaviour.
-# See https://bz.apache.org/bugzilla/show_bug.cgi?id=68973
-<IfModule mod_env.c>
-  SetEnv ap_trust_cgilike_cl
-</IfModule>
-
 AddDefaultCharset utf-8
 Options -Indexes

.idea/codeStyleSettings.xml.license

@@ -1,2 +0,0 @@
-SPDX-FileCopyrightText: 2014 ownCloud, Inc.
-SPDX-License-Identifier: AGPL-3.0-only

.jshintrc

@@ -1,5 +1,4 @@
 {
-	"esversion": 11,
 	"camelcase": true,
 	"eqeqeq": true,
 	"immed": true,
@@ -12,10 +11,10 @@
 	"maxparams": 5,
 	"curly": true,
 	"jquery": true,
+	"maxlen": 120,
 	"indent": 4,
 	"browser": true,
 	"laxbreak": true,
-	"asi": true,
 	"globals": {
 		"console": true,
 		"it": true,

.php-cs-fixer.dist.php

@@ -1,37 +1,24 @@
 <?php
 
 declare(strict_types=1);
-/**
- * SPDX-FileCopyrightText: 2022 Nextcloud GmbH and Nextcloud contributors
- * SPDX-License-Identifier: AGPL-3.0-or-later
- */
+
 require_once './vendor-bin/cs-fixer/vendor/autoload.php';
 
 use Nextcloud\CodingStandard\Config;
-use PhpCsFixer\Runner\Parallel\ParallelConfigFactory;
 
 $config = new Config();
 $config
-	->setParallelConfig(ParallelConfigFactory::detect())
 	->getFinder()
+	->ignoreVCSIgnored(true)
 	->exclude('config')
-	->exclude('3rdparty')
-	->exclude('build/stubs')
-	->exclude('composer')
+	->exclude('data')
+	->notPath('3rdparty')
+	->notPath('build/integration/vendor')
+	->notPath('build/lib')
+	->notPath('build/node_modules')
+	->notPath('build/stubs')
+	->notPath('composer')
+	->notPath('node_modules')
+	->notPath('vendor')
 	->in(__DIR__);
-
-$ignoredEntries = shell_exec('git status --porcelain --ignored ' . escapeshellarg(__DIR__));
-$ignoredEntries = explode("\n", $ignoredEntries);
-$ignoredEntries = array_filter($ignoredEntries, static fn (string $line) => str_starts_with($line, '!! '));
-$ignoredEntries = array_map(static fn (string $line) => substr($line, 3), $ignoredEntries);
-$ignoredEntries = array_values($ignoredEntries);
-
-foreach ($ignoredEntries as $ignoredEntry) {
-	if (str_ends_with($ignoredEntry, '/')) {
-		$config->getFinder()->exclude($ignoredEntry);
-	} else {
-		$config->getFinder()->notPath($ignoredEntry);
-	}
-}
-
 return $config;

.pre-commit-config.yaml

@@ -1,7 +1,5 @@
 # See https://pre-commit.com for more information
 # See https://pre-commit.com/hooks.html for more hooks
-# SPDX-FileCopyrightText: 2022 Nextcloud GmbH and Nextcloud contributors
-# SPDX-License-Identifier: AGPL-3.0-or-later
 repos:
 -   repo: https://github.com/pre-commit/pre-commit-hooks
     rev: v4.3.0

.scrutinizer.yml

@@ -1,6 +1,3 @@
-# SPDX-FileCopyrightText: 2016-2024 Nextcloud GmbH and Nextcloud contributors
-# SPDX-FileCopyrightText: 2016 ownCloud, Inc.
-# SPDX-License-Identifier: AGPL-3.0-only
 before_commands:
   - 'git submodule update --init --recursive'
 

.tx/config

@@ -74,12 +74,6 @@ source_file = translationfiles/templates/files_external.pot
 source_lang = en
 type        = PO
 
-[o:nextcloud:p:nextcloud:r:files_reminders]
-file_filter = translationfiles/<lang>/files_reminders.po
-source_file = translationfiles/templates/files_reminders.pot
-source_lang = en
-type        = PO
-
 [o:nextcloud:p:nextcloud:r:files_sharing]
 file_filter = translationfiles/<lang>/files_sharing.po
 source_file = translationfiles/templates/files_sharing.pot
@@ -116,12 +110,6 @@ source_file = translationfiles/templates/oauth2.pot
 source_lang = en
 type        = PO
 
-[o:nextcloud:p:nextcloud:r:profile]
-file_filter = translationfiles/<lang>/profile.po
-source_file = translationfiles/templates/profile.pot
-source_lang = en
-type        = PO
-
 [o:nextcloud:p:nextcloud:r:provisioning_api]
 file_filter = translationfiles/<lang>/provisioning_api.po
 source_file = translationfiles/templates/provisioning_api.pot
@@ -182,14 +170,9 @@ source_file = translationfiles/templates/weather_status.pot
 source_lang = en
 type        = PO
 
-[o:nextcloud:p:nextcloud:r:webhook_listeners]
-file_filter = translationfiles/<lang>/webhook_listeners.po
-source_file = translationfiles/templates/webhook_listeners.pot
-source_lang = en
-type        = PO
-
 [o:nextcloud:p:nextcloud:r:workflowengine]
 file_filter = translationfiles/<lang>/workflowengine.po
 source_file = translationfiles/templates/workflowengine.pot
 source_lang = en
 type        = PO
+

.user.ini

@@ -1,6 +1,3 @@
-; SPDX-FileCopyrightText: 2016-2024 Nextcloud GmbH and Nextcloud contributors
-; SPDX-FileCopyrightText: 2014-2016 ownCloud, Inc.
-; SPDX-License-Identifier: AGPL-3.0-only
 mbstring.func_overload=0
 always_populate_raw_post_data=-1
 default_charset='UTF-8'